Bidford Pharmacy 17 High Street Bidford-on-Avon Alcester B50 4BQ

1. 9 Jun 2026

   Received by Stratford-on-Avon

2. 17 Aug 2026

   Validated

   Checked as complete and ready for consideration.

3. 27 Aug 2026

   Added to PlanIndex

4. Decision

   Awaiting decision

   Decision expected by 12 October 2026, 8 weeks from validation under the statutory target for most applications. Extensions of time are common and are agreed case by case.

   Stratford-on-Avon took a median of 62 days over the applications it decided in the last year.

This application is with Stratford-on-Avon for determination, against a statutory target of eight weeks. Over the last year Stratford-on-Avon's median decision took 62 days. More in our guide to how long planning decisions take.

The published feed does not state which type of application this is; the register entry on Stratford-on-Avon's portal will say. Our guide explains the common types.

• River View 19 High Street Bidford-on-Avon Alcester B50 4BQ

  26/01121/TREE Submitted 5 May 2026 0m away

  T5-Alder-Fell T6-Alder-Fell

  Granted Trees 4 docs

• 3 Saxonfields Bidford-on-Avon Alcester B50 4BS

  24/02278/FUL Submitted 10 Sep 2024 34m away

  Single storey rear extension

  Decided Full applications Extension 10 docs
  Small domestic

• The Old Vicarage 13 High Street Bidford-on-Avon Alcester B50 4BQ

  24/01824/LBP Submitted 22 Jul 2024 61m away

  The proposed works are 1) installation of a battery storage system 2) installation of multi split heating / cooling system to the kitchen and dining room Battery storage It is proposed to install a floor mounted battery storage system within the garage, the batteries will be located on an external wall beneath the existing wall mounted solar inverter. Each battery capacity is 13.5 kwh and each battery measures 1,099 x 609 x 193 mm in size. The batteries will be capable of be charged from the existing solar PV array and from overnight off peak electricity from the grid. It is proposed to install up to 3 batteries. Multi split system installation The multi split heating system comprises 3 main components a) 2 x wall mounted venting units b) 1 x wall mounted compressor unit. It is proposed to wall mount 1 venting unit at high level in each of the dining room extension and the kitchen. The compressor unit is to be mounted low level on the external wall of the dining room. Black pipework will run along the external wall at low level and enter the rear lobby near floor level and run vertically in the corner where it will be discreetly boxed in. There will not be any visible pipework in the kitchen or dining room because the vent units connections are at the rear. The compressor is 804 x 298 x 252 mm in size.

  Refused Lawful development Extension 12 docs

• 47 High Street Bidford-on-Avon Alcester B50 4BQ

  24/02509/FUL Submitted 19 Sep 2024 62m away

  4no. replacement windows

  Decided Full applications Windows or glazing 23 docs

• 47 High Street Bidford-on-Avon Alcester B50 4BQ

  24/02510/LBC Submitted 19 Sep 2024 63m away

  Replacement windows

  Granted Heritage and listed buildings Windows or glazing 21 docs

• 2 Saxon Court High Street Bidford-on-Avon Alcester B50 4AB

  21/00028/FUL Submitted 5 Jan 2021 73m away

  Change of use of building from estate agents (Class E) to 1no. residential unit (Class C3)

  Decided Full applications 36 docs