Planning application
4 The Mint, Wallingford, Oxon, OX10 0XB
Works: Trees
Decided. The decision notice on the council portal carries the outcome in full, including any conditions.
Proposal
2 x Silver Birch In order to reduce excessive shading to communal garden, evenly reduce canopy on 2 number Silver Birch trees (shown in red and blue on attached sketch plan) by 3 metres to maintain as a more compact specimen. All cuts to be made at junctions leaving sufficient live growth to maintain and enhance the growth. Remove dead wood and damaged branches. Raise crown by 1.5-2 metres reducing branch tips only. Remarks:
As published by the council, reference P17/S4511/TCA
Application record
- Reference
- P17/S4511/TCA
- Type
- Works to trees in CA
- Status
- Decision Made
- Decision
- No obj CA works
- Received
- 26 Jan 2017
- Validated
- 26 Jan 2017
- Decided
- 7 Feb 2017
- Postcode
- OX10 0XB
Site history
Applications at this address on the South Oxfordshire register
This site has had 2 applications since 2015: 1 approved, 0 refused.
-
P15/S0290/LB Granted
4 The Mint Wallingford Oxon OX10 0XB
Installation of new boiler flue from front roof tiles between dormer windows.
Timeline
Dates from the published record
-
26 Jan 2017
Received by South Oxfordshire
-
7 Feb 2017
Decision issued: No obj CA works
-
27 Aug 2026
Added to PlanIndex
Documents
Plans, drawings, consultee responses and the officer's report
2 documents on file for this application
A planning file usually holds the application form, drawings and site plans, consultee responses, the officer's report and the decision notice.
Watch members (£5 a month) open the document list from here.
Open the documentsAfter the decision
South Oxfordshire has decided this application; the outcome above is the register's own wording and the decision notice on the council portal carries the detail. More in our guide to what happens after a planning decision.
About tree works applications
Applications for works to trees cover protected trees: consent under a tree preservation order, or six weeks notice for trees in a conservation area. More in our guide to planning application types.
Nearby applications
Within 0.3 miles
-
4 The Mint Wallingford OX10 0XB
To fix 1200mm high open timber trellis to timber posts set back from boundary to position trellis above top of existing 600mm high wall along one side boundary.
Granted Householder 11 docsDomestic -
4 The Mint Wallingford OX10 0XB
1. Sound proofing to bedroom wall at first floor level: to be 75mm thick timber stud, insulation quilt and plasterboard with emulsion paint finish to match existing. Overall thickness of new wall facing to be 90mm. Skirtings to be reused on face of new wall. 2. To fix 1200mm high open timber trellis to timber posts set back from boundary to position trellis above top of existing 600mm high wall along one side boundary.
Granted Heritage and listed buildings 11 docs -
10 The Mint, Wallingford, Oxon, OX10 0XB
Mountain Ash Mountain Ash - this tree is now encroaching on my house. It has been pollarded twice but this just makes it grow even more vigorously. It has completely outgrown my very small front garden. In fact the tree is now taller than my house and the roots are just touching the front wall of my house. It has grown far too big for such a small garden and needs to be felled. In the summer the tree also cuts out a lot of light in my and my neighbours garden. I have consulted David Cottrell of Tom Cottrell Landscapes and he agrees that the tree has completely outgrown my garden and needs to be felled. Remarks:
Decided Trees 2 docs -
7 The Mint WALLINGFORD Oxon OX10 0XB
Internal works including a through floor lift.
Granted Heritage and listed buildings 12 docs -
The Mint Goldsmiths Lane Wallingford OX10 0XB
Upgrade of external communal area lighting.
Granted Full applications 8 docs -
Wallingford Portcullis Social Club, 28 Goldsmiths Lane, Wallingford, OX10 0DU
Non-material amendment to application reference number P18/S0003/FUL (Demolition, part demolition, redevelopment and change of use of the Portcullis Club building & No29 to provide 14 residential units. Eight two-bedroom houses, three two-bedroom flats and three one-bedroom flats) - omit new glazed opening to Houses 1 and 2 along Goldsmiths Lane and install a suntube to provide natural light to the staircase of House 1 and House 2.
Decided Amendments New dwelling Demolition +1 6 docs
Other tree works applications
In South Oxfordshire
-
P26/S4235/TCA Decided
Thorpe Farm House Thorpe Street Aston Upthorpe Didcot OX11 9EQ
T1 - Copper Beech - Reduce branches by approximately 2 metres focusing mainly on lateral branches rather than the top. Lift canopy to provide statutory clearance over the road and clear from service cables. T2 - Tulip Tree - Reduce by approximately 3 metres to restore balance within the crown due to previous limb failure leaving the tree unbalanced. T3 - Horse Chestnut - Reduce by approximately 3 to 4 metres, leaving a natural flowing crown outline and remove major deadwood. T4 - To fell and remove 1 x Yew tree and install eco plugs to prevent re-growth.
-
P26/S4236/TPO Granted
1 Sherwood Gardens Henley-on-thames RG9 1QJ
T1 Copper Beech. Low canopy over road and footpath. To raise canopy to statutory clearances, (5.2m over road, 2.5m over footpath). To remove deadwood greater than 60mm over road and footpath, for safety purposes, minimising any chance for larger falling deadwood in windy conditions.
-
P26/S4118/TPO Decided
Johnson Matthey Technology Centre, Blount’s Court Road, Sonning Common RG4 9NH
Carry out all recommended works as listed within the accompanying tree survey document dated 24/08/26
-
P26/S4579/TCA Decided
St Nicholas House 90 High Street Wallingford OX10 0BW
Magnolia Tree - 1.5m reduce and height and lateral spread to previous pruning points
-
P26/S4354/TPO Granted
Henley College Deanfield Avenue Henley-on-thames RG9 1UH
Ash (T2 of TPO 09/2019) - Reduce back crown over single storey block D4 by a maximum of 4m at its widest point (work mainly relates to over extended limbs over roof). Reduce back low branches over the roof to create 3m clearance. Cutback branches from front of the adjacent building (D6) to create 2-3m clearance. To help balance the crown, reduce remaining crown by approx. 2m. To avoid altering the balance of the tree as a whole, the crown of the tree should be reduced in proportion to its original shape. All pruning cuts must be made at branch junctions, leaving sufficient live growth to maintain or enhance crown form.