Planning application
Britwell Hill Farm & West Cottage, Britwell Hill, Britwell Salome
Works: Trees
Permission granted. Work must normally begin within three years of the decision or the permission lapses.
Proposal
There is a larch that is located to the north east of the existing building that has decay around the basal area. Please accept this email as a 5 day notice to remove the Larch. In addition 5 oaks require deadwood to be removed, this work will occur at the same time. (FIVE DAY NOTICE) T1 Larch Spec: S15 Fell tree to ground level. Reason: R1 Sound arboricultural management Reason: R3 Limited safe useful life expectancy Reason: R4 To address potential hazard Reason: R6 Poor health, structural condition of form (delete as appropriate)
As published by the council, reference P14/S4652/TPO
Application record
- Reference
- P14/S4652/TPO
- Type
- Works to TPO
- Status
- Decision Made
- Decision
- Granted As published: Consent TPO works
- Received
- 7 Aug 2014
- Validated
- 7 Aug 2014
- Decided
- 13 Aug 2014
Site history
Applications at this address on the South Oxfordshire register
This site has had 5 applications since 2014: 5 approved, 0 refused.
-
P19/S3891/TPO Granted
Britwell Hill Farm & West Cottage, Britwell Hill, Britwell Salome
Oak - fell. The reason for this work is that the tree is dying back in the upper canopy with Ganoderma sp fungi observed at the base of the tree. The tree is suppressed by T10 and as such is not considered to be of significant amenity value.
-
P17/S5047/TPO Granted
Britwell Hill Farm & West Cottage, Britwell Hill, Britwell Salome
T2 - Beech - tip back canopy up to 2.5m on north side. T7 - Beech - tip back canopy by up to 3m and up to 5m above ground level over lawn only. Install protecting webbing to prevent bark damage from rope swing. T8 - Oak - tip back low branches over road to 5.3m. Install protective webbing to prevent bark damage. Sever ivy before next inspection. T10 - Oak - reduce upper canopy as part of the canopy has become exposed due to previous works - see photo. Remove deadwood. Recommend annual inspections due to the presence of the Giant Polypore from previous tree removal. T12 - Oak - tip back canopy growing towards the property by 1.5m. Remove deadwood. Annual inspections recommended. T14 - Oak - recommend to undertake lateral reduction of up to 2m and a crown reduction of up to 3m. Due to the fungal fruiting brackets recommend annual inspections. T16 - Field Maple - tip back up to 1.5m to provide clearance to the adjacent studio roof. T17 - Oak - recommend to inspect fracture point at 9m agl at time of crown cleaning works. T19 - Oak - reduce southern sidee of the canopy by up to 4m. T20 - Beech - climbing inspection required of storm damage at the top of main stem. T21 - Beech - tip back x 1 limb at 14m agl by up to 2m. Inspect the cavity at 15m on the east side - carry out inspection at same time as pruning works. T25 - Beech - tip back to provide 2m clearance to the adjacent building. Tip back up to 5.3m over where new driveway will be constructed. T28 - Oak - canopy has become congested - desirable to crown clean.
-
P15/S4870/TPO Granted
Britwell Hill Farm & West Cottage, Britwell Hill, Britwell Salome
T1733 - Oak - Fell. Cavaties are present at 3m agl on the western side of the main stem and 4m agl on the eastern side of the main stem. In addition a basal cavity is also present. It is concluded that the basal area is compromised due to the level of dysfunctional wood that is present. With the presence of the additional cavities on the main stem and that the tree is within faalling distance of the property the recommendation is to fell the tree. It is further proposed to undertake replacement planting.
-
P14/S4653/TPO Granted
Britwell Hill Farm & West Cottage, Britwell Hill, Britwell Salome
G2 - (T1 Beech) - Crown lift branches on the southern side of the canopy to 3m above ground level to provide clearance to the adjacent fencing and shed. To undertake a re-inspection to assess the fungal activity in 12 months to ensure that the Beech tree stays within safe limits as recognised within arboriculture. T2 - Beech - reduce western main scaffold branch by 3m - pruning back to the most appropriate branch unions. Reduce lower western laterals by up to 1.75m pruning back to suitable branch unions. (G3) -T3 - Oak - Crown reduce canopy by 5m, pruning back to the most suitable branch unions. G2 2 Beech and 3 Oak Spec: S7 Lift crown to a height of above ground level, by removing branch tips only , by removing bran Reason: R1 Sound arboricultural management Reason: R2 To ensure future compatibility with site, surroundings and usage Spec: S19 Please add the following at the end of all the aprroved works: All pruning cuts must be made at bra Reason: R1 Sound arboricultural management Reason: R2 To ensure future compatibility with site, surroundings and usage T2 Beech Spec: S1 Reduce crown by a maximum of n% and reshape Reason: R1 Sound arboricultural management Reason: R2 To ensure future compatibility with site, surroundings and usage Spec: S19 Please add the following at the end of all the aprroved works: All pruning cuts must be made at bra Reason: R1 Sound arboricultural management Reason: R2 To ensure future compatibility with site, surroundings and usage G3 5 Beech, 6 Oak Spec: S1 Reduce crown by a maximum of n% and reshape Reason: R1 Sound arboricultural management Reason: R2 To ensure future compatibility with site, surroundings and usage Spec: S19 Please add the following at the end of all the aprroved works: All pruning cuts must be made at bra Reason: R1 Sound arboricultural management Reason: R2 To ensure future compatibility with site, surroundings and usage
Timeline
Dates from the published record
-
7 Aug 2014
Received by South Oxfordshire
-
13 Aug 2014
Decision issued: Consent TPO works
-
11 Oct 2026
Added to PlanIndex
What this grant of permission means
South Oxfordshire granted permission on 13 August 2014, subject to any conditions on the decision notice. Work must normally begin within three years or the permission lapses. More in our guide to what happens after a planning decision.
About tree works applications
Applications for works to trees cover protected trees: consent under a tree preservation order, or six weeks notice for trees in a conservation area. More in our guide to planning application types.
Other tree works applications
In South Oxfordshire
-
P26/S4235/TCA Decided
Thorpe Farm House Thorpe Street Aston Upthorpe Didcot OX11 9EQ
T1 - Copper Beech - Reduce branches by approximately 2 metres focusing mainly on lateral branches rather than the top. Lift canopy to provide statutory clearance over the road and clear from service cables. T2 - Tulip Tree - Reduce by approximately 3 metres to restore balance within the crown due to previous limb failure leaving the tree unbalanced. T3 - Horse Chestnut - Reduce by approximately 3 to 4 metres, leaving a natural flowing crown outline and remove major deadwood. T4 - To fell and remove 1 x Yew tree and install eco plugs to prevent re-growth.
-
P26/S4236/TPO Granted
1 Sherwood Gardens Henley-on-thames RG9 1QJ
T1 Copper Beech. Low canopy over road and footpath. To raise canopy to statutory clearances, (5.2m over road, 2.5m over footpath). To remove deadwood greater than 60mm over road and footpath, for safety purposes, minimising any chance for larger falling deadwood in windy conditions.
-
P26/S4118/TPO Decided
Johnson Matthey Technology Centre, Blount’s Court Road, Sonning Common RG4 9NH
Carry out all recommended works as listed within the accompanying tree survey document dated 24/08/26
-
P26/S4579/TCA Decided
St Nicholas House 90 High Street Wallingford OX10 0BW
Magnolia Tree - 1.5m reduce and height and lateral spread to previous pruning points
-
P26/S4354/TPO Granted
Henley College Deanfield Avenue Henley-on-thames RG9 1UH
Ash (T2 of TPO 09/2019) - Reduce back crown over single storey block D4 by a maximum of 4m at its widest point (work mainly relates to over extended limbs over roof). Reduce back low branches over the roof to create 3m clearance. Cutback branches from front of the adjacent building (D6) to create 2-3m clearance. To help balance the crown, reduce remaining crown by approx. 2m. To avoid altering the balance of the tree as a whole, the crown of the tree should be reduced in proportion to its original shape. All pruning cuts must be made at branch junctions, leaving sufficient live growth to maintain or enhance crown form.