Planning application
26/0563/TPO
11 Cheltenham Close Exeter EX4 2EL
Proposal
Remove dead branches throughout the crown where they present a clear risk of falling into the garden, sheds or boundary fence. Remove broken or hanging branches at risk of detachment, limited to secondary and tertiary branches only, maximum cut diameter 80 mm. Crown lift to provide 2 m clearance above garden level by removing selected small secondary and tertiary branches only, maximum cut diameter 50 mm. Reduce lateral branches on the east aspect by up to 2-3 m, targeting secondary and tertiary branches, maximum cut diameter 80 mm, to trim back the periphery of the crown.
As published by the council, reference 26/0563/TPO
Timeline
Dates from the published record
-
19 Apr 2026
Received by Exeter
-
1 Jun 2026
Decision issued: Permitted
-
26 Jul 2026
Added to PlanIndex
What a grant of permission means
The process from here
Permission has been granted, usually subject to conditions listed on the decision notice, some of which must be discharged before work starts. The decision notice on the council portal sets out exactly what was approved.
Work must normally begin within three years of the decision or the permission lapses. Neighbours cannot appeal a grant; challenging one means judicial review of how the decision was made, within tight time limits.
About trees applications
How this application type works
Tree applications cover work to protected trees: those under a tree preservation order need consent for pruning or felling, and trees in a conservation area need six weeks written notice before work starts. The council assesses the amenity value of the tree and can refuse consent, approve it with conditions, or in conservation areas make a preservation order in response.
Nearby applications
Within 500 metres
-
25/1495/TPO Granted
Northmore House Cleve Lane Exeter EX4 2AR
T1 - Monterey Pine - Thin the density of the lowest primary lateral branch (which directly overhangs the front garden of the adjacent property) by 30%. This will consist of third order growth only, natural target pruning, and dead wood. Diameter cuts made will be restricted to 2 inch diameter. Reasons - Residents have been worried about this branch for many years. Re-assurance has been provided, and weight removed in the past. The proposed work is designed to reduce the 'sail effect' of the canopy, without adversely affecting the vigour and health of the limb/tree. T2 - Dying Yes tree - Reduce to approximately 6 metres high, or the bowl of the main stem. Reasons - The tree is dying, with very little living growth left. The work is essentially a pollard, and a last chance effort to invigorate the tree into producing foliage. Although pollarding does not always work, this tree will not survive, and start dropping the dead lateral branches. Reducing the size of a crown can concentrate a trees resources into producing new foliage, and so this remedial work is recommended. T3 - Holm Oak - Reduce one stem overhanging the rear gardens of Canterbury Rd by 4 metres. Cut size of approx. 27cm. The stem in question comes into contact (lower down) with the previously reduced stem overhanging the gardens. Reasons - The stem originates from a groups of stems forming the crown of the tree. The tree was coppiced earlier in its life, hence the multi stemmed re-growth. This re-growth is inherently weak, and there are significant lateral forces exerted, especially in high winds, making it likely for stems to fail at the original union. Currently the stem in question moves to a greater degree (observed in moderate winds) when compared with the rest of the crown. Therefore this work is recommended. Recommendations/evidence is provided by Hywel Davies, Consultant for Exe Tree Care Ltd
-
21/0872/FUL Granted
172 Gloucester Road Exeter Devon EX4 2JB
First floor side and rear extension.
-
26/0667/DIS Awaiting decision
Land At Redhills Exwick Lane Exeter
Discharge conditions 4 (Materials), 5 (Drainage Adoption and Maintenance Arrangements) and 13 (External Lighting) of reserved matters approval 24/0531/RES - Reserved Matters Application (appearance, landscaping, layout and scale) pursuant to outline planning permission 20/1380/OUT for residential development of 80 homes and associated infrastructure.
-
25/1350/VOC Awaiting decision
Land At Redhills Exwick Lane Exeter
Variation of condition 15 (pedestrian improvement schemes) of appeal decision APP/Y1110/W/21/3278148 / 20/1380/OUT(Outline planning permission for residential development of up to 80 dwellings and associated infrastructure with all matters reserved except access) to allow 50% occupation of the development before the implementation of a scheme designed to facilitate pedestrian linkage of the development to services/facilities to the south and east, in accordance with details that have been submitted to and approved by the Local Planning Authority.
-
25/1704/FUL Granted
18 Chester Close Exeter EX4 2EJ
Loft conversion, including installation of 3x rooflights and 1x window to gable end.
-
25/1684/FUL Awaiting decision
Newbery Car Breakers Redhills Exeter EX4 1SS
Construction of 7 no dwellings including associated access and infrastructure
Other trees applications
In Exeter
-
26/1122/CAT Awaiting decision
Collingwood Mews Bicton Place Exeter EX1 2PG
T1 - Lawson cypress, abutting and pressing on the side boundary wall: Fell
-
26/1112/CAT Awaiting decision
Homedale Health 34 Denmark Road Exeter EX1 1SE
T1 Yew reduce canopy by approximately 1m and reduce disproportionately overgrown westerly limb by approximately 2m in order to re balance tree. T2 Pittosporum reduce by approximately 1m for maintenance.
-
26/1116/CAT Awaiting decision
10 Magdalen Road Exeter EX2 4SY
T1 - Eucalyptus - Reduce away from property (no. 10 Magdalen Road) allowing a clearance of approximately 1.5m - 2m. Reduce away from neighbouring property (no. 12 Magdalen Road ) allowing a clearance of approximately 1.5 - 2m. Reduce lower branch towards road on Northwest aspect by 1.5 -2m. Crown raise lowest limb in neighbouring property by approx 1m -1.5m. Reason for works: The proposed works are intended to provide appropriate clearance from the neighbouring properties (Nos. 10 and 12) and the adjacent road, reducing the likelihood of branches coming into contact with the buildings during periods of high winds or continued growth. The crown reduction and selective crown raising will also allow increased natural light to reach the neighbouring properties while retaining the tree?s overall form, health and amenity value. The works represent a balanced approach to ongoing tree management and will help minimise the potential for future damage to nearby structures.
-
26/1113/CAT Awaiting decision
40 Alphington Road Exeter EX2 8HS
T001 Elder - A full crown reduction of approximately 1.0-1.5 metres to reduce overall crown dimensions while maintaining a balanced and natural form. T002 Acer - Reduce and reshape the Acer crown by up to 0.5-1.0m on selected branch extremities to maintain a balanced natural form, undertake a light crown thin (approximately 10-15%) to remove congested and crossing branches, and carry out a minor crown lift where required to provide clearance beneath the canopy
-
26/0574/TPO Granted
Block H Birks Halls New North Road Exeter EX4 4GE
The yew tree in question is showing signs of asymmetric crown formation. After previous limb failure causing a structural imbalance to the remaining crown. My proposal for the future vigour of this tree is to Install a dynamic cobra bracing system to support the imbalance of the lower structural limbs forming a strong three way triangulation of support for the lateral growth that has become very prone to wind through. Please see photo (Yew Reduction Points) for bracing points highlighted in blue. Selective thinning of the whole crown by removing internal growth with a maximum cut size of 60mm diameter 1.5m length by removing multiple smaller limbs I believe this will be more beneficial to the trees structure, and limit the amount of large wounds left by the thinning works. Allowing for better wind distribution through the remaining crown hopefully eliminating future wind through. by leaving the larger structural limbs intact for the future longevity of the structural integrity. please see photo (Yew Reduction Points) with cut points highlighted in red for chosen thinning points throughout the crown Remove failed limb back to the branch collar. The failed limb supported by lower crown hazard beam fracturing of the timber 150mm diameter 2.5m length this will be the largest of the limbs to be removed through suggested works. red dotted line on attached photo hard to see the hazard beam on the photo (Yew Reduction Points) Selective reduction of the height maximum of 1m in length 40mm cut size to the crown on selected limbs again highlighted in red so that again the risk of wind through will be reduced.