Planning application
25/1159/CAT
Collinson Taddyforde Estate Exeter EX4 4AT
Proposal
T1 - Bay: Reduce in height by 3 metres, and reshape the crown by 2 metres
As published by the council, reference 25/1159/CAT
Timeline
Dates from the published record
-
22 Aug 2025
Received by Exeter
-
3 Oct 2025
Decision issued: Permitted
-
26 Jul 2026
Added to PlanIndex
What a grant of permission means
The process from here
Permission has been granted, usually subject to conditions listed on the decision notice, some of which must be discharged before work starts. The decision notice on the council portal sets out exactly what was approved.
Work must normally begin within three years of the decision or the permission lapses. Neighbours cannot appeal a grant; challenging one means judicial review of how the decision was made, within tight time limits.
About trees applications
How this application type works
Tree applications cover work to protected trees: those under a tree preservation order need consent for pruning or felling, and trees in a conservation area need six weeks written notice before work starts. The council assesses the amenity value of the tree and can refuse consent, approve it with conditions, or in conservation areas make a preservation order in response.
Nearby applications
Within 500 metres
-
26/0089/FUL Granted
Kelmscott Taddyforde Estate Exeter EX4 4AT
Removal of existing UPVC porch on the front elevation and construction of new porch on the front elevation with associated works.
-
25/1216/CAT Granted
Melvyn Taddyforde Estate Exeter EX4 4AT
T1 - Sycamore - Remove the stem leaning over the road, SSW facing towards 'The Chalet'. The stem has a 36cm cut, and arises from the main stem at 10 feet high. - Reduce the height of the remaining tree by 4 metres, with topping cuts of approximately 15cm diameter. Shorten back all lateral branches by up to 2metres (approx. 9cm diameter cut size) - crown lift overhanging the roadside to 5.2metres above ground level.
-
25/1295/VOC Refused
Two Ways Taddyforde Estate Exeter EX4 4AT
Variation of Condition 2 on Planning Permission Ref. 22/0116/FUL, granted 20 April 2022, to increase height and alter fenestration/materials of replacement garage
-
26/0648/CAT Granted
Brookfield House New North Road Exeter EX4 4LA
T1 - Eucalyptus- remove 5 branches back to trunk: 4 over the roof and in front of the house and 1 growing over driveway and on to the building opposite. Crown lift over parking space to 3m.
-
19/1783/FUL Withdrawn
St Catherines New North Road Exeter Devon EX4 4AG
Replacement of existing steel windows with aluminium replacements.
-
26/0519/LED Awaiting decision
Greencroft Streatham Rise Exeter EX4 4PE
Commencement of Planning Permission Ref. 20/1104/FUL (granted on 22 October 2021), relating to the demolition of Greencroft and its replacement with two new dwellings, within 3 years of the decision date (as required by Condition 1)
Other trees applications
In Exeter
-
26/1122/CAT Awaiting decision
Collingwood Mews Bicton Place Exeter EX1 2PG
T1 - Lawson cypress, abutting and pressing on the side boundary wall: Fell
-
26/1112/CAT Awaiting decision
Homedale Health 34 Denmark Road Exeter EX1 1SE
T1 Yew reduce canopy by approximately 1m and reduce disproportionately overgrown westerly limb by approximately 2m in order to re balance tree. T2 Pittosporum reduce by approximately 1m for maintenance.
-
26/1116/CAT Awaiting decision
10 Magdalen Road Exeter EX2 4SY
T1 - Eucalyptus - Reduce away from property (no. 10 Magdalen Road) allowing a clearance of approximately 1.5m - 2m. Reduce away from neighbouring property (no. 12 Magdalen Road ) allowing a clearance of approximately 1.5 - 2m. Reduce lower branch towards road on Northwest aspect by 1.5 -2m. Crown raise lowest limb in neighbouring property by approx 1m -1.5m. Reason for works: The proposed works are intended to provide appropriate clearance from the neighbouring properties (Nos. 10 and 12) and the adjacent road, reducing the likelihood of branches coming into contact with the buildings during periods of high winds or continued growth. The crown reduction and selective crown raising will also allow increased natural light to reach the neighbouring properties while retaining the tree?s overall form, health and amenity value. The works represent a balanced approach to ongoing tree management and will help minimise the potential for future damage to nearby structures.
-
26/1113/CAT Awaiting decision
40 Alphington Road Exeter EX2 8HS
T001 Elder - A full crown reduction of approximately 1.0-1.5 metres to reduce overall crown dimensions while maintaining a balanced and natural form. T002 Acer - Reduce and reshape the Acer crown by up to 0.5-1.0m on selected branch extremities to maintain a balanced natural form, undertake a light crown thin (approximately 10-15%) to remove congested and crossing branches, and carry out a minor crown lift where required to provide clearance beneath the canopy
-
26/0574/TPO Granted
Block H Birks Halls New North Road Exeter EX4 4GE
The yew tree in question is showing signs of asymmetric crown formation. After previous limb failure causing a structural imbalance to the remaining crown. My proposal for the future vigour of this tree is to Install a dynamic cobra bracing system to support the imbalance of the lower structural limbs forming a strong three way triangulation of support for the lateral growth that has become very prone to wind through. Please see photo (Yew Reduction Points) for bracing points highlighted in blue. Selective thinning of the whole crown by removing internal growth with a maximum cut size of 60mm diameter 1.5m length by removing multiple smaller limbs I believe this will be more beneficial to the trees structure, and limit the amount of large wounds left by the thinning works. Allowing for better wind distribution through the remaining crown hopefully eliminating future wind through. by leaving the larger structural limbs intact for the future longevity of the structural integrity. please see photo (Yew Reduction Points) with cut points highlighted in red for chosen thinning points throughout the crown Remove failed limb back to the branch collar. The failed limb supported by lower crown hazard beam fracturing of the timber 150mm diameter 2.5m length this will be the largest of the limbs to be removed through suggested works. red dotted line on attached photo hard to see the hazard beam on the photo (Yew Reduction Points) Selective reduction of the height maximum of 1m in length 40mm cut size to the crown on selected limbs again highlighted in red so that again the risk of wind through will be reduced.