Skip to content
PlanIndex Get alerts
Menu

Planning application

The Spinney, Sotwell Street, Brightwell cum Sotwell, Oxon, OX10 0RH

Granted South Oxfordshire P21/S3935/TCA Works to trees in CA

Works: Trees

Permission granted. Work must normally begin within three years of the decision or the permission lapses.

Proposal

We have a walnut tree in our front garden which died some time ago. It has not produced any leaves for at least two years and I suspect it had honey fungus. It has started to drop branches and we would really like to remove it before the winter storms. We are in a conservation area and I understand that we need permission from you before we do so.

As published by the council, reference P21/S3935/TCA

Application record

Reference
P21/S3935/TCA
Type
Works to trees in CA
Status
Decision Made
Decision
Granted As published: Exception approv. CA
Received
10 Sep 2021
Validated
10 Sep 2021
Decided
24 Sep 2021
Postcode
OX10 0RH

Timeline

Dates from the published record

  1. 10 Sep 2021

    Received by South Oxfordshire

  2. 24 Sep 2021

    Decision issued: Exception approv. CA

  3. 12 Sep 2026

    Added to PlanIndex

Documents

Plans, drawings, consultee responses and the officer's report

2 documents on file for this application

A planning file usually holds the application form, drawings and site plans, consultee responses, the officer's report and the decision notice.

Watch members (£5 a month) open the document list from here.

Open the documents

What this grant of permission means

South Oxfordshire granted permission on 24 September 2021, subject to any conditions on the decision notice. Work must normally begin within three years or the permission lapses. More in our guide to what happens after a planning decision.

About tree works applications

Applications for works to trees cover protected trees: consent under a tree preservation order, or six weeks notice for trees in a conservation area. More in our guide to planning application types.

Nearby applications

Within 0.3 miles

In South Oxfordshire

  • P26/S4235/TCA Decided

    Thorpe Farm House Thorpe Street Aston Upthorpe Didcot OX11 9EQ

    T1 - Copper Beech - Reduce branches by approximately 2 metres focusing mainly on lateral branches rather than the top. Lift canopy to provide statutory clearance over the road and clear from service cables. T2 - Tulip Tree - Reduce by approximately 3 metres to restore balance within the crown due to previous limb failure leaving the tree unbalanced. T3 - Horse Chestnut - Reduce by approximately 3 to 4 metres, leaving a natural flowing crown outline and remove major deadwood. T4 - To fell and remove 1 x Yew tree and install eco plugs to prevent re-growth.

    Received 21 Sep, published by the council 2 Oct 2026 Trees
  • P26/S4236/TPO Granted

    1 Sherwood Gardens Henley-on-thames RG9 1QJ

    T1 Copper Beech. Low canopy over road and footpath. To raise canopy to statutory clearances, (5.2m over road, 2.5m over footpath). To remove deadwood greater than 60mm over road and footpath, for safety purposes, minimising any chance for larger falling deadwood in windy conditions.

    Received 21 Sep, published by the council 2 Oct 2026 Trees
  • P26/S4118/TPO Decided

    Johnson Matthey Technology Centre, Blount’s Court Road, Sonning Common RG4 9NH

    Carry out all recommended works as listed within the accompanying tree survey document dated 24/08/26

    Received 14 Sep, published by the council 26 Sep 2026 Trees
  • P26/S4579/TCA Decided

    St Nicholas House 90 High Street Wallingford OX10 0BW

    Magnolia Tree - 1.5m reduce and height and lateral spread to previous pruning points

    Received 7 Oct, published by the council 11 Oct 2026 Trees
  • P26/S4354/TPO Granted

    Henley College Deanfield Avenue Henley-on-thames RG9 1UH

    Ash (T2 of TPO 09/2019) - Reduce back crown over single storey block D4 by a maximum of 4m at its widest point (work mainly relates to over extended limbs over roof). Reduce back low branches over the roof to create 3m clearance. Cutback branches from front of the adjacent building (D6) to create 2-3m clearance. To help balance the crown, reduce remaining crown by approx. 2m. To avoid altering the balance of the tree as a whole, the crown of the tree should be reduced in proportion to its original shape. All pruning cuts must be made at branch junctions, leaving sufficient live growth to maintain or enhance crown form.

    Received 28 Sep, published by the council 11 Oct 2026 Trees