Planning application
The Rectory Garden, Manor Road, Goring, Oxon
Works: Trees
Withdrawn before a decision, so it carries no planning weight. A revised scheme can be submitted at any time.
Proposal
T1-T8 Lime T10 - Lime T1 & T2 - Lime - remove lower limbs as indicated above, also replanted Lime 9. T2-5 & T6-8 - Lime Avenue - aim is to let more light in by raising canopy of lower branches and major side trunks. T4 - Lime - reduce major side trunk on cemetery gate side to the knuckle with new growth. Also reduce limb over path. Lime trees No. 4 & 7 - reduce major side trunks on cemetery gate side to the knuckle with new growth. Also reduce limbs and any deadwood over path. Lime tree No. 5 - possibly remove low epicormic growth, however this may ned to be repeated every 2-3 years. Lime tree No. 6 - Reduce bottom three limbs over hedge and neighbouring property, as indicated above. Also remove dead branches over path. Lime tree No. 10 - by gate - remove lowest imbs and remove low epicormic growth, as indicted above, however this pruning of epicormics may need to be repeated every two to three years. Remarks:
As published by the council, reference P17/S4940/TCA
Application record
- Reference
- P17/S4940/TCA
- Type
- Works to trees in CA
- Status
- Withdrawn
- Decision
- Withdrawn
- Received
- 28 Dec 2017
- Validated
- 28 Dec 2017
- Decided
- 13 Feb 2018
Site history
Applications at this address on the South Oxfordshire register
This site has had 2 applications since 2017.
-
P18/S4398/TCA Decided
The Rectory Garden, Manor Road, Goring, Oxon
T1-T8 - Lime T10 - Lime T1 - Lime - remove deadwood. Lift crown to a height of 4m above ground level by removing branches back to source that are less than 75mm in diameter and the tips of the branches greater than 75mm in diameter. Pruning cuts should not exceed 75mm. All pruning cuts must be made at branch junctions, leaving sufficient live growth to maintain or enhance crown form. T2 - Lime - remove deadwood. Remove damaged branches. Lift crown to a height of 4m above ground level by removing 2 branches back to source that are less than 75mm in diameter and the tips of the branchgreater than 75mm in diameter. Pruning cuts should not exceed 75mm. All pruning cuts must be made at branch junctions, leaving sufficient live growth to mainain or enhance crown form. T3 - Lime - remove deadwood. Remove damaged branches. Reduce branches towards Cedar by approx 1-2m. Pruning cuts should not exceed 75mm. All pruning cuts must be made at branch junctions, leaving sufficient live growth to maintain or enhance crown form. T4 - Lime - remove deadwood. Remove damaged branches. Lift crown to a height of 4m above ground level by removing branch tips only. Pruning cuts hould not exceed 75mm. Reduce western stem (stem meets trunk at 2m above ground level) by approx 3-4m. All pruning cuts must be made at branch junctions, leaving sufficient live growth to maintain or enhance crown form. Advisory: it is recommended that the 2 cavities that are located at approx 3m and 4m above ground level on the western stem (stem meets trunk at 2m above ground level) are inspected by a competent arborist during an aerial inspection, if decay at cavities require further works to be carried out to the tree, then the council should be contacted with evidence to justify the further works. T5 - Lime - remove deadwood. Remove damaged branches, remove epicormics growth to 4m above ground level. T6 - Lime - remove deadwood. Remove damaged branches. Lift crown to a height of 4m above ground level by removing branch tips only. Pruning cuts should not exceed 75mm. All pruning cuts must be made at branch junctions, leaving sufficient live growth to maintain or enhance crown form. T7 - Lim e- remove deadwood. Remove damaged branches. Lift crown to a height of 4m above ground level by removing branch tips only. Pruning cuts should not exceed 75mm. Reduce the height and lateral spread of western stem (stem that meets the trunk at 3m above ground level) by approx 2m. Pruning cuts should not exceed 75mm. All pruning cuts must be made at branch junctions, leaving sufficient live growth to maintain or enhance crown form. T8 - Lime - remove deadwood. Remove damaged branches. Lift crown to a height of 4m above ground level by removing branch tips only. Pruning cuts should not exceed 75mm. All pruning cuts must be made at branch junctions, leaving sufficient live growth to maintain or enhance crown form. T10 - Lime - remove deadwood. Remove damaged branches. Remove epicormics groth up to a height of 4m above ground level. Lift crown to a height of 4m above ground level by removing 1 branch with a diameter of less than 75mm back to source and the tips only of other branches. Pruning cuts should not exceed 75mm. All pruning cuts must be made at branch junctions, leaving sufficient live growth to maintain or enhance crown form. Remarks:
Timeline
Dates from the published record
-
28 Dec 2017
Received by South Oxfordshire
-
13 Feb 2018
Decision issued: Withdrawn
-
15 Aug 2026
Added to PlanIndex
Documents
Plans, drawings, consultee responses and the officer's report
1 document on file for this application
A planning file usually holds the application form, drawings and site plans, consultee responses, the officer's report and the decision notice.
Watch members (£5 a month) open the document list from here.
Open the documentsWhat withdrawal means
The applicant withdrew this application before South Oxfordshire decided it, and is free to submit a revised scheme at any time. More in our guide to what happens after a planning decision.
About tree works applications
Applications for works to trees cover protected trees: consent under a tree preservation order, or six weeks notice for trees in a conservation area. More in our guide to planning application types.
Other tree works applications
In South Oxfordshire
-
P26/S4235/TCA Decided
Thorpe Farm House Thorpe Street Aston Upthorpe Didcot OX11 9EQ
T1 - Copper Beech - Reduce branches by approximately 2 metres focusing mainly on lateral branches rather than the top. Lift canopy to provide statutory clearance over the road and clear from service cables. T2 - Tulip Tree - Reduce by approximately 3 metres to restore balance within the crown due to previous limb failure leaving the tree unbalanced. T3 - Horse Chestnut - Reduce by approximately 3 to 4 metres, leaving a natural flowing crown outline and remove major deadwood. T4 - To fell and remove 1 x Yew tree and install eco plugs to prevent re-growth.
-
P26/S4236/TPO Granted
1 Sherwood Gardens Henley-on-thames RG9 1QJ
T1 Copper Beech. Low canopy over road and footpath. To raise canopy to statutory clearances, (5.2m over road, 2.5m over footpath). To remove deadwood greater than 60mm over road and footpath, for safety purposes, minimising any chance for larger falling deadwood in windy conditions.
-
P26/S4118/TPO Decided
Johnson Matthey Technology Centre, Blount’s Court Road, Sonning Common RG4 9NH
Carry out all recommended works as listed within the accompanying tree survey document dated 24/08/26
-
P26/S4579/TCA Decided
St Nicholas House 90 High Street Wallingford OX10 0BW
Magnolia Tree - 1.5m reduce and height and lateral spread to previous pruning points
-
P26/S4354/TPO Granted
Henley College Deanfield Avenue Henley-on-thames RG9 1UH
Ash (T2 of TPO 09/2019) - Reduce back crown over single storey block D4 by a maximum of 4m at its widest point (work mainly relates to over extended limbs over roof). Reduce back low branches over the roof to create 3m clearance. Cutback branches from front of the adjacent building (D6) to create 2-3m clearance. To help balance the crown, reduce remaining crown by approx. 2m. To avoid altering the balance of the tree as a whole, the crown of the tree should be reduced in proportion to its original shape. All pruning cuts must be made at branch junctions, leaving sufficient live growth to maintain or enhance crown form.