Planning application
Eastern edge of Lambridge Wood, Lambridge Wood Road, HENLEY-ON-THAMES
Works: Trees
Withdrawn before a decision, so it carries no planning weight. A revised scheme can be submitted at any time.
Proposal
T1 - Ash, T2 - Leaning Beech, T3 - Beech, T4 - Reduce Beech, T5 - Silver Birch, T6 - Willow Area to right of drive/front of house. T3 - Thin/reduce leaning Beech tree removing large dead branch and branches badly damaged by squirrels. T4 - Reduce branches of another Beech Tree overhanging pond without dropping branches on netting or pond liner. T5 - Fell a Silver Birch by pond which became lose on its root plate during the 1987 storm. T6 - Willow with dead bark on trunk - reduce heavily to retain habitat for woodpeckers. Other marked trees to fell to promote light for hazel or remove leaning hazard, taking care not to damage the old Hazel below Beech. Sever ivy on heavily affected larger tree. Area behind house and lawn T1 - Large Ash to reduce by 4-5m. Retain large stubs for habitat. Marked Ash saplings to thin out to promote better Ash and provide light to understory of smaller trees. Sever ivy on heavily affected larger trees. Optional extra T2 - Leaning Beech tree marked - sectional fell leaving wood in lengths (accepting some damage to trees below as climbing out on extremities is not safely possible).
As published by the council, reference P15/S4889/TPO
Application record
- Reference
- P15/S4889/TPO
- Type
- Works to TPO
- Status
- Withdrawn
- Decision
- Application is not yet decided
- Received
- 6 Mar 2015
- Validated
- 6 Mar 2015
Timeline
Dates from the published record
-
6 Mar 2015
Received by South Oxfordshire
-
15 Sep 2026
Added to PlanIndex
What withdrawal means
The applicant withdrew this application before South Oxfordshire decided it, and is free to submit a revised scheme at any time. More in our guide to what happens after a planning decision.
About tree works applications
Applications for works to trees cover protected trees: consent under a tree preservation order, or six weeks notice for trees in a conservation area. More in our guide to planning application types.
Other tree works applications
In South Oxfordshire
-
P26/S4235/TCA Decided
Thorpe Farm House Thorpe Street Aston Upthorpe Didcot OX11 9EQ
T1 - Copper Beech - Reduce branches by approximately 2 metres focusing mainly on lateral branches rather than the top. Lift canopy to provide statutory clearance over the road and clear from service cables. T2 - Tulip Tree - Reduce by approximately 3 metres to restore balance within the crown due to previous limb failure leaving the tree unbalanced. T3 - Horse Chestnut - Reduce by approximately 3 to 4 metres, leaving a natural flowing crown outline and remove major deadwood. T4 - To fell and remove 1 x Yew tree and install eco plugs to prevent re-growth.
-
P26/S4236/TPO Granted
1 Sherwood Gardens Henley-on-thames RG9 1QJ
T1 Copper Beech. Low canopy over road and footpath. To raise canopy to statutory clearances, (5.2m over road, 2.5m over footpath). To remove deadwood greater than 60mm over road and footpath, for safety purposes, minimising any chance for larger falling deadwood in windy conditions.
-
P26/S4118/TPO Decided
Johnson Matthey Technology Centre, Blount’s Court Road, Sonning Common RG4 9NH
Carry out all recommended works as listed within the accompanying tree survey document dated 24/08/26
-
P26/S4579/TCA Decided
St Nicholas House 90 High Street Wallingford OX10 0BW
Magnolia Tree - 1.5m reduce and height and lateral spread to previous pruning points
-
P26/S4354/TPO Granted
Henley College Deanfield Avenue Henley-on-thames RG9 1UH
Ash (T2 of TPO 09/2019) - Reduce back crown over single storey block D4 by a maximum of 4m at its widest point (work mainly relates to over extended limbs over roof). Reduce back low branches over the roof to create 3m clearance. Cutback branches from front of the adjacent building (D6) to create 2-3m clearance. To help balance the crown, reduce remaining crown by approx. 2m. To avoid altering the balance of the tree as a whole, the crown of the tree should be reduced in proportion to its original shape. All pruning cuts must be made at branch junctions, leaving sufficient live growth to maintain or enhance crown form.