Planning application
Wallingford Town Centre, 9 St Martins Street, Wallingford, OX10 0AL
Works: Trees
Decided. The decision notice on the council portal carries the outcome in full, including any conditions.
Proposal
T1 - Aspen T12 - Horse Chestnut T41 - Holm Oak T1 - Canopy Reduction works to reduce the weight and sail effect of the upper canopy, this will in turn redcudce the stresses being put upon the decayed section of the lower main stem T12 - To reduce by 2-3m from the tips the 2x Regnerated stems that protude from the upper canopy outline to bring the canopy back int a more compact form and redcuce the cail effect. T41 - To reduce the end weight of the heavily leaning stem that overhangs the pathway by 2-3m from the tips to relieve the pressure on the faulted twin stem junction point. All debris will be removed from site Remarks:
As published by the council, reference P15/S4768/TCA
Application record
- Reference
- P15/S4768/TCA
- Type
- Works to trees in CA
- Status
- Decision Made
- Decision
- No obj CA works
- Received
- 17 Dec 2015
- Validated
- 17 Dec 2015
- Decided
- 20 Jan 2016
- Postcode
- OX10 0AL
Timeline
Dates from the published record
-
17 Dec 2015
Received by South Oxfordshire
-
20 Jan 2016
Decision issued: No obj CA works
-
12 Sep 2026
Added to PlanIndex
Documents
Plans, drawings, consultee responses and the officer's report
2 documents on file for this application
A planning file usually holds the application form, drawings and site plans, consultee responses, the officer's report and the decision notice.
Watch members (£5 a month) open the document list from here.
Open the documentsAfter the decision
South Oxfordshire has decided this application; the outcome above is the register's own wording and the decision notice on the council portal carries the detail. More in our guide to what happens after a planning decision.
About tree works applications
Applications for works to trees cover protected trees: consent under a tree preservation order, or six weeks notice for trees in a conservation area. More in our guide to planning application types.
Nearby applications
Within 0.3 miles
-
6 St Martins Street, Wallingford, OX10 0AL
Exchange of extract flue system from the old layout to the new layout (As amplified by Heritage Statement received 17 May 2021).
Granted Heritage and listed buildings 21 docs -
6 St Martins Street, Wallingford, OX10 0AL
Exchange of extract flue system from the old layout to the new layout (As amplified by ventilation report received 7 May 2021 and Heritage Statement received 17 May 2021 and noise assessment received 16 June 2021).
Granted Full applications 23 docs -
20 St Martins Street Wallingford OX10 0AL
Discharge conditions 3 (Materials) & 4 (Windows) of planning permission P14/S0408/FUL Alterations and extensions to existing building to provide second floor level of accommodation containing 2 apartments and altered window openings at first floor and entrances at ground floor.
Granted Conditions New dwelling Extension +1 3 docsSeveral homes -
11 St Martins Street, Wallingford, OX10 0AL
Discharge of condition 3 - sample materials on application ref. P18/S3868/FUL Demolition of existing retail units and construction of new retail space with 8 retirement apartments above and associated parking.
Granted Conditions New dwelling Demolition 3 docs -
21 St Martins Street, Wallingford, OX10 0AL
Discharge of conditions 3(Schedule of Materials), 4(Archaeological Watching Brief), 9(Electric Vehicle Charging Points) & 10(Bird Box) on application P21/S3035/FUL (Extensions to the side and front elevation along with alterations. Change of use to dry cleaners on ground floor. New garage to rear of side extension and first floor access. Proposed creation of 2 bedroom apartment on 1st floor. New traditional timber style shop front. New timber and slate tile lean-to canopy to the rear elevation to replace uPVC canopy).
Granted Conditions Extension Windows or glazing 7 docs -
11 St Martins Street Wallingford OX10 0AL
Discharge of condition 10 - archaeology on application ref. P18/S3868/FUL (As per additional information received 24 October 2019) Demolition of existing retail units and construction of new retail space with 8 retirement apartments above and associated parking.
Refused Conditions New dwelling Demolition 6 docs
Other tree works applications
In South Oxfordshire
-
P26/S4235/TCA Decided
Thorpe Farm House Thorpe Street Aston Upthorpe Didcot OX11 9EQ
T1 - Copper Beech - Reduce branches by approximately 2 metres focusing mainly on lateral branches rather than the top. Lift canopy to provide statutory clearance over the road and clear from service cables. T2 - Tulip Tree - Reduce by approximately 3 metres to restore balance within the crown due to previous limb failure leaving the tree unbalanced. T3 - Horse Chestnut - Reduce by approximately 3 to 4 metres, leaving a natural flowing crown outline and remove major deadwood. T4 - To fell and remove 1 x Yew tree and install eco plugs to prevent re-growth.
-
P26/S4236/TPO Granted
1 Sherwood Gardens Henley-on-thames RG9 1QJ
T1 Copper Beech. Low canopy over road and footpath. To raise canopy to statutory clearances, (5.2m over road, 2.5m over footpath). To remove deadwood greater than 60mm over road and footpath, for safety purposes, minimising any chance for larger falling deadwood in windy conditions.
-
P26/S4118/TPO Decided
Johnson Matthey Technology Centre, Blount’s Court Road, Sonning Common RG4 9NH
Carry out all recommended works as listed within the accompanying tree survey document dated 24/08/26
-
P26/S4579/TCA Decided
St Nicholas House 90 High Street Wallingford OX10 0BW
Magnolia Tree - 1.5m reduce and height and lateral spread to previous pruning points
-
P26/S4354/TPO Granted
Henley College Deanfield Avenue Henley-on-thames RG9 1UH
Ash (T2 of TPO 09/2019) - Reduce back crown over single storey block D4 by a maximum of 4m at its widest point (work mainly relates to over extended limbs over roof). Reduce back low branches over the roof to create 3m clearance. Cutback branches from front of the adjacent building (D6) to create 2-3m clearance. To help balance the crown, reduce remaining crown by approx. 2m. To avoid altering the balance of the tree as a whole, the crown of the tree should be reduced in proportion to its original shape. All pruning cuts must be made at branch junctions, leaving sufficient live growth to maintain or enhance crown form.