Planning application
26/0326/CAT
32 Thornton Hill Exeter EX4 4NS
Proposal
Tree Works Justification Conservation Area Notification The proposed works relate to three trees located within a designated Conservation Area and are intended to provide reasonable management of tree size, form, and proximity to built structures, whilst ensuring the long-term health, safety, and amenity value of the trees is retained. T001 Acer The Acer has developed a moderately extended canopy which is beginning to outgrow the available space within the garden setting. The proposed minor crown reduction of approximately 1.0 m in height and 1.0 m in radial spread is intended to bring the canopy back into proportion with the surrounding garden and nearby structures. The reduction will be carried out by pruning back to suitable growth points, retaining the trees primary framework and a high proportion of foliage-bearing structure. This approach represents good arboricultural management, maintaining the trees natural form whilst preventing future overextension. T002 Apple Tree The Apple tree currently has two primary limbs extending over the garage roof, creating potential for debris accumulation and ongoing contact with the structure. Removal of these limbs back to the main stem will provide appropriate clearance from the building. The remaining canopy will be pollarded at approximately 2.5 m above ground level, establishing a compact and manageable framework for future growth and facilitating long-term maintenance. In addition, the ivy present on the stem will be severed at the base to prevent further encroachment into the canopy, allowing improved inspection and reducing additional loading on the tree. T003 Olive Tree The Olive tree has developed a dense and extended canopy which would benefit from light management pruning. A modest crown reduction of approximately 1.5 m in height and 1.0 m in radial spread is proposed to improve overall structure and maintain the tree at a scale appropriate to the garden environment. The works will retain the main frame
As published by the council, reference 26/0326/CAT
Timeline
Dates from the published record
-
6 Mar 2026
Received by Exeter
-
29 May 2026
Decision issued: Permitted
-
26 Jul 2026
Added to PlanIndex
What a grant of permission means
The process from here
Permission has been granted, usually subject to conditions listed on the decision notice, some of which must be discharged before work starts. The decision notice on the council portal sets out exactly what was approved.
Work must normally begin within three years of the decision or the permission lapses. Neighbours cannot appeal a grant; challenging one means judicial review of how the decision was made, within tight time limits.
About trees applications
How this application type works
Tree applications cover work to protected trees: those under a tree preservation order need consent for pruning or felling, and trees in a conservation area need six weeks written notice before work starts. The council assesses the amenity value of the tree and can refuse consent, approve it with conditions, or in conservation areas make a preservation order in response.
Nearby applications
Within 500 metres
-
26/0304/FUL Awaiting decision
32 Thornton Hill Exeter EX4 4NS
Reconfigure and extend main house and convert rear detached outbuildings into art studio.
-
26/0543/DIS Decided
44 Thornton Hill Exeter EX4 4NS
Discharge of Condition 3 (materials) application 25/0881/FUL Bricks, Garage door, Slate roof, Side gate, Pedestrian door, Guttering and downpipes.
-
25/1209/LPD Decided
40 Thornton Hill Exeter EX4 4NS
Install 1x rooflight to front roof elevation, replace 1x rooflight to rear roof elevation, rebuild part of rear elevation wall to match existing.
-
24/1069/FUL Granted
33 Thornton Hill Exeter EX4 4NR
Enlargement of kitchen with rooflights installed. Erection of glazed lean to verandah and Rebuilding of lean-to store to form conservatory
-
25/1157/CAT Granted
14 Highcross Road Exeter EX4 4NP
1x Olive tree - Remove 3x lowest branches that are heavily encroaching onto the garage, and prune back to the main stem. Crown lift the remaining lower canopy to achieve a minimum of 2m clearance above ground level. Reduce height by approximately 1m back to suitable growth points. Reduce remaining canopy to create a natural shape. All arising material shall be removed from site and returned to our premises for recycling. Justification The tree is beginning to outgrow its growing space and take over the small garden. Low branches are also heavily encroaching onto the properties garage.
-
26/0638/CAT Granted
7 West Avenue Exeter EX4 4SD
Birch (B1) - crown reduction to reduce height from 11.5 metres to 7.5 metres and prune back branches overhanging neighbour's garden and street.
Other trees applications
In Exeter
-
26/1122/CAT Awaiting decision
Collingwood Mews Bicton Place Exeter EX1 2PG
T1 - Lawson cypress, abutting and pressing on the side boundary wall: Fell
-
26/1112/CAT Awaiting decision
Homedale Health 34 Denmark Road Exeter EX1 1SE
T1 Yew reduce canopy by approximately 1m and reduce disproportionately overgrown westerly limb by approximately 2m in order to re balance tree. T2 Pittosporum reduce by approximately 1m for maintenance.
-
26/1116/CAT Awaiting decision
10 Magdalen Road Exeter EX2 4SY
T1 - Eucalyptus - Reduce away from property (no. 10 Magdalen Road) allowing a clearance of approximately 1.5m - 2m. Reduce away from neighbouring property (no. 12 Magdalen Road ) allowing a clearance of approximately 1.5 - 2m. Reduce lower branch towards road on Northwest aspect by 1.5 -2m. Crown raise lowest limb in neighbouring property by approx 1m -1.5m. Reason for works: The proposed works are intended to provide appropriate clearance from the neighbouring properties (Nos. 10 and 12) and the adjacent road, reducing the likelihood of branches coming into contact with the buildings during periods of high winds or continued growth. The crown reduction and selective crown raising will also allow increased natural light to reach the neighbouring properties while retaining the tree?s overall form, health and amenity value. The works represent a balanced approach to ongoing tree management and will help minimise the potential for future damage to nearby structures.
-
26/1113/CAT Awaiting decision
40 Alphington Road Exeter EX2 8HS
T001 Elder - A full crown reduction of approximately 1.0-1.5 metres to reduce overall crown dimensions while maintaining a balanced and natural form. T002 Acer - Reduce and reshape the Acer crown by up to 0.5-1.0m on selected branch extremities to maintain a balanced natural form, undertake a light crown thin (approximately 10-15%) to remove congested and crossing branches, and carry out a minor crown lift where required to provide clearance beneath the canopy
-
26/0574/TPO Granted
Block H Birks Halls New North Road Exeter EX4 4GE
The yew tree in question is showing signs of asymmetric crown formation. After previous limb failure causing a structural imbalance to the remaining crown. My proposal for the future vigour of this tree is to Install a dynamic cobra bracing system to support the imbalance of the lower structural limbs forming a strong three way triangulation of support for the lateral growth that has become very prone to wind through. Please see photo (Yew Reduction Points) for bracing points highlighted in blue. Selective thinning of the whole crown by removing internal growth with a maximum cut size of 60mm diameter 1.5m length by removing multiple smaller limbs I believe this will be more beneficial to the trees structure, and limit the amount of large wounds left by the thinning works. Allowing for better wind distribution through the remaining crown hopefully eliminating future wind through. by leaving the larger structural limbs intact for the future longevity of the structural integrity. please see photo (Yew Reduction Points) with cut points highlighted in red for chosen thinning points throughout the crown Remove failed limb back to the branch collar. The failed limb supported by lower crown hazard beam fracturing of the timber 150mm diameter 2.5m length this will be the largest of the limbs to be removed through suggested works. red dotted line on attached photo hard to see the hazard beam on the photo (Yew Reduction Points) Selective reduction of the height maximum of 1m in length 40mm cut size to the crown on selected limbs again highlighted in red so that again the risk of wind through will be reduced.