Planning application
61 Jenwood Road Dunkeswell Honiton EX14 4UY
Works: Trees
Still open. Anyone can comment while the consultation period runs, and comments go to the council rather than to us.
Proposal
T001. English Oak : reduce the remaining tree back to the main crown break, removing the unstable upper crown and significantly compromised residual branches. Retain the lower stem as standing deadwood/habitat at a safe and appropriate height. T002, Beech : reduce the crown by approximately 4-5m in height and lateral spread, retaining a balanced natural form and pruning to suitable secondary growth points. Install an appropriately specified dynamic Cobra bracing system between the principal stems. T003, Common Beech : selectively reduce the crown by approximately 1.5-2.5 m in height and lateral spread, retaining a balanced natural form and pruning to suitable secondary growth points. Remove deadwood as required. T004, Beech : selectively reduce the crown by approximately 3-4 m in height and lateral spread, retaining a balanced natural form and pruning to suitable secondary growth points. Focus the reduction on exposed sections and growth extending towards the adjacent garage/building.
As published by the council, reference 26/1913/TRE
Application record
- Reference
- 26/1913/TRE
- Type
- Felling/Lopping (TPO)
- Status
- Awaiting decision
- Received
- 21 Sep 2026
- Validated
- 21 Sep 2026
- Ward
- Dunkeswell And Otterhead
- Parish
- Dunkeswell
- Postcode
- EX14 4UY
Site history
Applications at this address on the East Devon register
This site has had 2 applications since 2021.
-
21/0239/FUL Withdrawn
61 Jenwood Road Dunkeswell Honiton EX14 4UY
Conversion of existing stand alone double garage into annexe building/accommodation
Timeline
Dates from the published record
-
21 Sep 2026
Received by East Devon
-
24 Sep 2026
Added to PlanIndex
-
Decision
Awaiting decision
Decision expected by 16 November 2026, 8 weeks from validation under the statutory target for most applications. Extensions of time are common and are agreed case by case.
East Devon took a median of 43 days over the applications it decided in the last year.
Who's behind it
Company information only, from the register and Companies House
Topp Tree Care Agent, a tree-works contractor registered in Newton Abbot
Active · incorporated 2025 · Newton Abbot
46 applications on PlanIndex · across 4 councils · 47% granted
Trade members see everything this firm has filed, how it was decided, and get an email the day it files again.
See their track recordDocuments
Plans, drawings, consultee responses and the officer's report
3 documents on file for this application
A planning file usually holds the application form, drawings and site plans, consultee responses, the officer's report and the decision notice.
Watch members (£5 a month) open the document list from here.
Open the documentsWhat happens while it is decided
This application is with East Devon for determination, against a statutory target of eight weeks. Over the last year East Devon decided tree works applications in a median of 39 days. More in our guide to how long planning decisions take.
About tree works applications
Applications for works to trees cover protected trees: consent under a tree preservation order, or six weeks notice for trees in a conservation area. More in our guide to planning application types.
Nearby applications
Within 0.3 miles
-
51 Jenwood Road Dunkeswell Devon EX14 4UY
T1, Beech : crown lift and reduce branches in lower to mid canopy by 3-4m.
Granted Trees 5 docs -
61 Jenwood Road Dunkeswell Honiton EX14 4UY
Conversion of existing stand alone double garage into annexe building/accommodation
Withdrawn Full applications 6 docs -
11 Le Marchant Close Dunkeswell Honiton EX14 4XD
Two beech trees in the rear hedge bank: reduce height and northerly and westerly crown spreads by approximately 1.5m with maximum diameter pruning cuts of 4cm
Granted Trees 7 docs -
1 Potters Stile Dunkeswell Honiton EX14 4XA
T1: Beech - Pruning of the lower part of the southeastern canopy where it overhangs the extended part of the bungalow by up to 2m, maximum diameter pruning cuts of 4cm. The suggested works are depicted in the attached annotated photo.
Granted Trees 7 docs -
Land To The East Of Orchard View Dunkeswell
93% historically approved · decision due ~4 Mar
Hybrid application for 43 dwellings (full application for 41 dwellings and outline application for up to two self/custom build plots with all matters reserved except for access), with access, drainage features, public open space and ancillary works.
Awaiting decision Full applications 109 docsMajor scheme -
18 Simcoe Way Dunkeswell Honiton EX14 4UR
Oak : 1. Crown lift by shortening the lower branches on the west side of the tree over the conservatory and on the north side over the neighbouring garden, by approximately 3m to suitable growth points. 2. Shorten the branches protruding from the canopy on the south side overhanging the Recreation Ground, by approximately 2m.
Granted Trees 7 docs
Other tree works applications
In East Devon
-
26/1585/TRE Granted
22 Coulsdon Road Sidmouth Devon EX10 9JP
T1, Alder : overall canopy reduction by approximately 1500mm up to a maximum of 2250mm with cut diameters up to 50mm. Light pruning of internal growth surrounding the adjacent street light to provide clearance as necessary.
-
26/2044/TCA Awaiting decision
3 Station Road Budleigh Salterton EX9 6RJ
T1, Birch : reduce height by approximately 2m. T2, Birch : reduce height by approximately 2m.
-
26/2015/TRE Awaiting decision
Voi Old Beer Road Seaton EX12 2PX
T1: Cherry: removal - dying. Removal of T1 due to very poor condition, it is in the late stages of decline showing very little leaf cover when observed in peak season.
-
26/1860/TRE Awaiting decision
33 Deepways Budleigh Salterton EX9 6RA
Cherry - crown reduction by no more than 1.2m and reduce garden-side branches back to the boundary line.
-
26/2000/TCA Awaiting decision
St Marys Church West Street Axminster EX13 5NU
T2, Cedar : to reduce the lower-lateral limbs on south-eastern and western aspects by between 1-2m in length to reduce the end weight. Maximum cut diameter circa 100mm.