Planning application
29 Heath View London N2 0QD
Works: Trees
Still open. Anyone can comment while the consultation period runs, and comments go to the council rather than to us.
Proposal
1 x Oak (applicants ref. T1) - Reduce crown by up to 3m in height and 2m on lateral spread in order to maintain size of tree and limit spread of roots, to minimise future damage and reduce risk of subsidence to rear of property. Standing in Area A1 of Tree Preservation Order. 1 x Hawthorn (applicants ref. T2) - Reduce entire crown by up to 2m in order to maintain size of tree and limit spread of roots, to minimise future damage and reduce risk of subsidence to rear of property. Standing in Area A1 of Tree Preservation Order. 1 x Cherry (applicants ref. T3) - Reduce entire crown by up to 2m in order to maintain size of tree and limit spread of roots, to minimise future damage and reduce risk of subsidence to rear of property. Standing in Area A1 of Tree Preservation Order.
As published by the council, reference TPP/0480/26
Application record
- Reference
- TPP/0480/26
- Status
- Pending Consideration
- Received
- 18 Aug 2026
- Validated
- 18 Aug 2026
- Postcode
- N2 0QD
Timeline
Dates from the published record
-
18 Aug 2026
Received by Barnet
-
18 Aug 2026
Added to PlanIndex
-
Decision
Awaiting decision
Decision expected by 13 October 2026, 8 weeks from validation under the statutory target for most applications. Extensions of time are common and are agreed case by case.
Barnet took a median of 42 days over the applications it decided in the last year.
What happens while it is decided
The process from here
This application is with Barnet for determination. The council publicises it, consults neighbours and technical bodies where required, and weighs the responses against local and national planning policy.
The statutory target is eight weeks for most applications and thirteen for major development, though extensions of time are common. Comments carry most weight while the case is undecided, so check the council portal for the deadline if you want to respond.
About this record
Reading the register
This page mirrors an entry on the statutory planning register that Barnet is required to keep. The published feed for this record does not state which type of application it is, which is common for older entries and for some council systems; the register entry on the council portal will say, alongside the case officer and any consultation dates.
Every planning application follows the same broad path: submission, validation, publicity, then a decision by officers or committee. Our guide to planning application types explains the common types and what each can approve.
Nearby applications
Within 500 metres
-
8 The Leys London N2 0HE
1 x Lombardy Poplar - Reduce crown back to most recent pruning points, approximately 5m reduction. Reduce height of Ivy by approximately 1m to allow light penetration to growth points. Remove basal sprouts.
Decided Trees 5 docs -
48 Howard Walk London N2 0HB
77% historically approved · decision due ~25 Mar
Single storey side extension with 1no. rooflight
Awaiting decision Householder Extension Loft or dormer 19 docsSmall domestic -
48 Howard Walk London N2 0HB
87% historically approved · decision due ~9 Nov
3 x Eucalyptus (applicants ref. T1, T3 and T4) - Fell.
Awaiting decision Trees 4 docs -
3 The Leys London N2 0HE
1 x Holm Oak - Reduce crown height to balance and shape (approx. 0.3m). Reduce crown spread towards the property lightly to balance (approx. 0.3m). 1 x Large Oak - Thin crown by 15%. 1 x Lime - Remove trunk growth to 6m. Thin crown by 15%.
Decided Trees 4 docs -
35 Brim Hill London N2 0HA
87% historically approved · decision due ~17 Mar
1 x Horse Chestnut (applicants ref. T2) - Diameter at 1.5m - 0.3m. Height - 8m. Crown Spread Diameter - 6m. Fell to ground level.
Awaiting decision Trees 4 docs -
35 Brim Hill London N2 0HA
87% historically approved · decision due ~9 Dec
1 x Leyland Cypress (applicants ref. T1) - Diameter at 1.5m - 0.7m. Height - 18m. Crown Spread Diameter - 12m. Section dismantle tree and grind stump to a depth of 200mm. 1 x Horse Chestnut (applicants ref. T2) - Diameter at 1.5m - 0.3m. Height - 8m. Crown Spread Diameter - 6m. Reduce height by up to 3m and lateral spread on all sides by up to 2m. 1 x Mulberry (applicants ref. G1) - Diameter at 1.5m - 0.3m. Height - 6m. Crown Spread Diameter - 6m. Reduce height by up to 1.5m and lateral spread on all sides by up to 1.5m. Cut back all branches growing into no.37 back to boundary. 1 x Scots Pine (applicants ref. G1) - Diameter at 1.5m - 0.3m. Height - 8m. Crown Spread Diameter - 4m. Cut back all branches growing into no.37 to give 0.5-1m from their roof.
Awaiting decision Trees 3 docs