Skip to content
PlanIndex Get alerts
Menu

Planning application

84 Huntingfield Road SW15 5EU

Granted Wandsworth 2024/3428 Householder

Permission granted. Work must normally begin within three years of the decision or the permission lapses.

Proposal

Removal of pebbledash to front and rear elevations

As published by the council, reference 2024/3428

Application record

Reference
2024/3428
Type
Householder
Status
FINAL DECISION
Decision
Approve with Conditions
Received
8 Oct 2024
Validated
21 Oct 2024
Decided
11 Dec 2024
Ward
West Putney
Decision by
Delegated Standard
Postcode
SW15 5EU

Timeline

Dates from the published record

  1. 8 Oct 2024

    Received by Wandsworth

  2. 21 Oct 2024

    Validated

    Checked as complete and ready for consideration.

  3. 11 Dec 2024

    Decision issued: Approve with Conditions

  4. 30 Aug 2026

    Added to PlanIndex

Documents

Plans, drawings, consultee responses and the officer's report

12 documents on file for this application

A planning file usually holds the application form, drawings and site plans, consultee responses, the officer's report and the decision notice.

Trade members open them from here.

Open the documents

What a grant of permission means

The process from here

Permission has been granted, usually subject to conditions listed on the decision notice, some of which must be discharged before work starts. The decision notice on the council portal sets out exactly what was approved.

Work must normally begin within three years of the decision or the permission lapses. Neighbours cannot appeal a grant; challenging one means judicial review of how the decision was made, within tight time limits.

About householder applications

How this application type works

Householder applications cover work to an existing house and its garden: extensions, loft and garage conversions, porches, outbuildings and similar alterations within the boundary of the home. They cannot be used to create a separate dwelling or change what the building is used for. Councils aim to decide them within eight weeks, and immediate neighbours are usually notified and given a chance to comment.

More on householder applications in our guide

Nearby applications

Within 500 metres

  • 24 Swinburne Road SW15 5EB

    2026/1774 Submitted 7 May 2026 63m away

    87% historically approved · decision due ~2 Jul

    T1 Poplar: Carry out a controlled and proportionate reduction of regrowth arising from established historic pollard points. Works to comprise: Reduction of all secondary regrowth to leave approximately 2 to 3 metres of extension growth from the existing pollard heads Retention of the full historic pollard framework and all primary structural limbs Selective thinning of congested regrowth where necessary to maintain an even and stable crown structure Removal of dead, dying, damaged or crossing branches where present All pruning cuts to be undertaken to suitable growth points in strict accordance with BS3998:2010 Tree Work Recommendations, avoiding the creation of large diameter wounds and preserving the integrity of the existing pollard heads. No cutting back to, or beyond, the established pollard points is proposed. Arboricultural Justification The subject tree exhibits clear evidence of historic pollarding, with established pollard heads and cyclical regrowth typical of managed Poplar species. The proposed works represent: Routine cyclical management of a previously pollarded tree A measured and sustainable reduction consistent with accepted arboricultural practice A necessary intervention to prevent excessive extension growth, reduce end weight, and maintain structural integrity The specification has been carefully limited to ensure: No over pruning or structural harm Preservation of long term tree health and vitality Retention of amenity value within the Conservation Area Avoidance of large pruning wounds which could accelerate decay Constraints and Limitations: Works will not involve cutting to boundary lines where this would require excessive or indiscriminate pruning Works will not exceed 30 percent of recent regrowth Works will not alter the fundamental structure, height or character of the tree Any more severe reduction, including cutting back to or beyond pollard points or to boundary limits, would: Be contrary to BS3998 best practice Introduce a high risk

    Awaiting decision Trees
  • 24 Swinburne Road SW15 5EB

    2026/1066 Submitted 17 Mar 2026 63m away

    T1 Poplar Tree - Reduce by 40%, approx. 5-6m from the height to the previous points of reduction (Pollard points). Justification - as part of good, routine tree maintenance and to maintain tree at a manageable size for it's location and proximity to the front of the property.

    Decided Trees 5 docs
  • 65 Huntingfield Road SW15

    2012/0443 Submitted 1 Feb 2012 64m away

    Installation of replacement windows and doors.

    Withdrawn Householder Windows or glazing 2 docs
    Domestic
  • 24 Swinburne Road London Wandsworth SW15 5EB

    2026/1743 Submitted 7 May 2026 69m away

    87% historically approved · decision due ~2 Jul

    T1 Poplar: Carry out a controlled and proportionate reduction of regrowth arising from established historic pollard points. Works to comprise: Reduction of all secondary regrowth to leave approximately 2 to 3 metres of extension growth from the existing pollard heads Retention of the full historic pollard framework and all primary structural limbs Selective thinning of congested regrowth where necessary to maintain an even and stable crown structure Removal of dead, dying, damaged or crossing branches where present All pruning cuts to be undertaken to suitable growth points in strict accordance with BS3998:2010 Tree Work Recommendations, avoiding the creation of large diameter wounds and preserving the integrity of the existing pollard heads. No cutting back to, or beyond, the established pollard points is proposed. Arboricultural Justification The subject tree exhibits clear evidence of historic pollarding, with established pollard heads and cyclical regrowth typical of managed Poplar species. The proposed works represent: Routine cyclical management of a previously pollarded tree A measured and sustainable reduction consistent with accepted arboricultural practice A necessary intervention to prevent excessive extension growth, reduce end weight, and maintain structural integrity The specification has been carefully limited to ensure: No over pruning or structural harm Preservation of long term tree health and vitality Retention of amenity value within the Conservation Area Avoidance of large pruning wounds which could accelerate decay Constraints and Limitations: Works will not involve cutting to boundary lines where this would require excessive or indiscriminate pruning Works will not exceed 30 percent of recent regrowth Works will not alter the fundamental structure, height or character of the tree Any more severe reduction, including cutting back to or beyond pollard points or to boundary limits, would: Be contrary to BS3998 best practice Introduce a high risk of decay and weakly attached regrowth Result in structural imbalance and reduced longevity Be likely to be considered over pruning within a Conservation Area, with potential for enforcement action Summary: Proportionate Measured Consistent with established management Fully compliant with current arboricultural standards They represent the minimum intervention necessary to manage the tree safely and sustainably.

    Awaiting decision Trees
  • 24 Swinburne Road London Wandsworth SW15 5EB

    2026/1904 Submitted 19 May 2026 69m away

    87% historically approved · decision due ~14 Jul

    T1 Poplar: Carry out a controlled and proportionate reduction of regrowth arising from established historic pollard points. Works to comprise: Reduction of all secondary regrowth to leave approximately 2 to 3 metres of extension growth from the existing pollard heads Retention of the full historic pollard framework and all primary structural limbs Selective thinning of congested regrowth where necessary to maintain an even and stable crown structure Removal of dead, dying, damaged or crossing branches where present All pruning cuts to be undertaken to suitable growth points in strict accordance with BS3998:2010 Tree Work Recommendations, avoiding the creation of large diameter wounds and preserving the integrity of the existing pollard heads. No cutting back to, or beyond, the established pollard points is proposed. Arboricultural Justification The subject tree exhibits clear evidence of historic pollarding, with established pollard heads and cyclical regrowth typical of managed Poplar species. The proposed works represent: Routine cyclical management of a previously pollarded tree A measured and sustainable reduction consistent with accepted arboricultural practice A necessary intervention to prevent excessive extension growth, reduce end weight, and maintain structural integrity The specification has been carefully limited to ensure: No over pruning or structural harm Preservation of long term tree health and vitality Retention of amenity value within the Conservation Area Avoidance of large pruning wounds which could accelerate decay Constraints and Limitations: Works will not involve cutting to boundary lines where this would require excessive or indiscriminate pruning Works will not exceed 30 percent of recent regrowth Works will not alter the fundamental structure, height or character of the tree Any more severe reduction, including cutting back to or beyond pollard points or to boundary limits, would: Be contrary to BS3998 best practice Introduce a high risk of decay and weakly attached regrowth Result in structural imbalance and reduced longevity Be likely to be considered over pruning within a Conservation Area, with potential for enforcement action Summary: Proportionate Measured Consistent with established management Fully compliant with current arboricultural standards They represent the minimum intervention necessary to manage the tree safely and sustainably.

    Awaiting decision Trees
  • 24 Swinburne Road SW15 5EB

    2026/1775 Submitted 10 Jul 2026 71m away

    T1 Poplar: Reduction of all secondary regrowth to leave approximately 2 to 3 metres of extension growth from the existing pollard heads, retention of the full historic pollard framework and all primary structural limbs, selective thinning of congested regrowth where necessary to maintain an even and stable crown structure and removal of dead, dying, damaged or crossing branches. (TREE PRESERVATION (NO. 521) ORDER 2026)

    Granted Extension Trees

In Wandsworth

  • 2026/0398 Granted

    65 West Hill Road SW18 1LE

    Erection of two, single-storey outbuildings (studio and garden/swimming pool room) ancillary to main house located in rear garden.

    29 Jan 2026 Householder
  • 2025/4355 Granted

    44 Endlesham Road SW12 8JL

    Alterations including erection of side and rear roof extension to main rear roof and extension above part of two-storey back addition (with French doors and glazed safety screen). Installlation of solar panels to roof of extension.

    1 Dec 2025 Householder
  • 2026/3027 Withdrawn

    10 Gamlen Road SW15 1AB

    Alterations including erection of a mansard extension (with French doors and safety railings) to the main rear roof, including raising the ridge by 100mm, installation of two rooflights to front roofslope, installation of a new pitched roof and patio doors to the existing single storey rear extension. Revisions to planning permission 2026/1990, to include reduction of rear extension rooflights from three to two; addition of one conservation rooflight to the front roof slope above the stairwell; and improvements to the front garden and boundary treatment, including a new brick boundary wall, planting, path and paving, cycle store, and external redecoration.

    24 Aug 2026 Householder
  • 2026/3038 Withdrawn

    43 Sistova Road SW12 9QR

    Erection of 3m high timber boudary fence.

    24 Aug 2026 Householder
  • 2026/3026 Withdrawn

    6 Rockland Road SW15 2LN

    Installation of UPVC double glazed sash windows.

    24 Aug 2026 Householder