Planning application
Phase 4 Platt Industrial Estate Maidstone Road Platt Sevenoaks Kent TN15 8JL
Relates to 20/02712/FL
Permission granted. Work must normally begin within three years of the decision or the permission lapses.
Proposal
Non Material Amendment to planning permission TM/20/02712/FL: Reduction in building length from 37.7m (7 bays) to 22m (4 bays), omit roof parapet and addition of wash down area
As published by the council, reference 21/02093/NMA
Application record
- Reference
- 21/02093/NMA
- Type
- Non Material Amendment
- Status
- Decided
- Decision
- Granted As published: Approved
- Received
- 28 Jul 2021
- Validated
- 28 Jul 2021
- Decided
- 24 Aug 2021
- Ward
- Borough Green And Long Mill
- Parish
- Platt
- Decision by
- Delegated Decision
- Postcode
- TN15 8JL
Site history
Applications at this address on the Tonbridge and Malling register
This site has had 4 applications since 2020: 3 approved, 1 refused.
-
22/01190/NMA Refused
Phase 4 Platt Industrial Estate Maidstone Road Platt Sevenoaks Kent TN15 8JL
Non Material Amendment to planning permission TM/20/02712/FL: To move the reduced sized building 4.5m east and 4m north
-
21/02094/RD Granted
Phase 4 Platt Industrial Estate Maidstone Road Platt Sevenoaks Kent TN15 8JL
Details of conditions 10 (landscaping and boundary treatment), 11 (landscaping scheme), 13 (refuse) 24 (site investigations), and 27 (noise) pursuant to planning permission TM/20/02712/FL (1no. new B2 industrial unit with associated vehicle access and parking)
-
20/02712/FL Granted
Phase 4 Platt Industrial Estate Maidstone Road Platt Sevenoaks Kent TN15 8JL
1no. new B2 industrial unit with associated vehicle access and parking
Timeline
Dates from the published record
-
28 Jul 2021
Received by Tonbridge and Malling
-
24 Aug 2021
Decision issued: Approved
-
29 Jul 2026
Added to PlanIndex
-
20 Aug 2026
Status changed to Decided
Previously Approved.
Related applications
Cases linked to this one on the register
-
20/02712/FL Granted
Phase 4 Platt Industrial Estate Maidstone Road Platt Sevenoaks Kent TN15 8JL
1no. new B2 industrial unit with associated vehicle access and parking
What this grant of permission means
Tonbridge and Malling granted permission on 24 August 2021, subject to any conditions on the decision notice. Work must normally begin within three years or the permission lapses. More in our guide to what happens after a planning decision.
About amendment applications
An amendment application makes limited changes to a permission that already exists; anything beyond modest adjustment needs a fresh application. More in our guide to planning application types.
Nearby applications
Within 0.3 miles
-
Phase 4 Platt Industrial Estate Maidstone Road Platt Sevenoaks Kent TN15 8JL
Details of conditions 10 (landscaping and boundary treatment), 11 (landscaping scheme), 13 (refuse) 24 (site investigations), and 27 (noise) pursuant to planning permission TM/20/02712/FL (1no. new B2 industrial unit with associated vehicle access and parking)
Granted Outline 16 docs -
Phase 4 Platt Industrial Estate Maidstone Road Platt Sevenoaks Kent TN15 8JL
Non Material Amendment to planning permission TM/20/02712/FL: To move the reduced sized building 4.5m east and 4m north
Refused Amendments 7 docs -
Phase 4 Platt Industrial Estate Maidstone Road Platt Sevenoaks Kent TN15 8JL
1no. new B2 industrial unit with associated vehicle access and parking
Granted Full applications 22 docs -
The Coffee Cabin Platt Industrial Estate Maidstone Road Platt Sevenoaks Kent
Retrospective application : Siting of a temporary cabin structure serving hot food takeaway, A5 use within the site of industrial uses B1 B2 and B8
Withdrawn Full applications 12 docs -
Unit 1 Platt Industrial Estate Maidstone Road Platt Sevenoaks Kent TN15 8JL
Change of use to B2 industrial
Granted Full applications 16 docs -
Land North Of Platinum Way Maidstone Road Platt Sevenoaks Kent
Details of Ecological Mitigation pursuant to Condition 12 of planning permission TM/19/2964 (KCC reference: KCC/TM/0214/2020 & TM/19/2964/R12)
Granted Other 2 docs
Other amendment applications
In Tonbridge and Malling
-
26/01564/NMA Granted
Westwick House Tower Hill Offham West Malling Kent ME19 5NH
Non-Material Amendment to TM/25/02062/PDVLR (Larger home single storey rear extension) to introduce valley gutter to ensure larger rear home extension would not physically link to additional storey granted prior approval under reference 25/02063/PDVDAS
-
26/01052/NMA Granted
Royal British Legion Industries Hall Road Aylesford Kent ME20 7NX
Non Material Amendment to Planning permission TM/25/00382/PA Demolition of existing building and structures to provide 1no. warehouse building within a flexible B2 / B8 Use Class (General Industrial / Storage and Distribution), together with open storage (Use Class B8), alongside associated landscaping, parking and servicing, and other infrastructure. To amend condition 2 ( Approved plans) to reflect a series of minor amendments proposed to the approved development
-
26/01614/NMA Awaiting decision
Riding Farm Riding Lane Hildenborough Tonbridge Kent TN11 9LN
Non-Material Amendment to planning permission 24/00733/FL (Demolition of existing buildings and erection of eight residential dwellings together with access, parking, drainage, landscaping, and associated works) for alterations to house type locations, internal layouts and parking layout. Alterations to stonework on the elevation of units, external doors, windows and roof lights
-
26/01314/NMA Granted
Cedar Grange 64A Sevenoaks Road Borough Green Sevenoaks Kent TN15 8AP
Non-Material Amendment to planning permission TM/25/01633/FL (part one/part two storey front, side and rear extensions) for an additional internal door and one window
-
26/01566/NMA Awaiting decision
The Farmhouse 244 Bull Lane Eccles Aylesford Kent ME20 7HF
Non-Material Amendment to planning permission 21/02748/FL (Retention of the existing dwelling and the erection of 3 No. additional dwellings with amenity space, parking, landscaping and access). For minor amendment to the location of the approved parking spaces and a minor change to the configuration of the turning area