Planning application
P21/S2582/CM
Didcot Sewage Treatment Works, Basil Hill Road, Didcot, OX11 7HJ
Proposal
Screening Opinion for Thames Water Utilities Limited, for: Request for an EIA screening opinion and notification of intention to undertake works under permitted development rights for an upgrade to Didcot Sewage Treatment Works
As published by the council, reference P21/S2582/CM
Timeline
Dates from the published record
-
3 Jun 2021
Received by South Oxfordshire
-
27 Jul 2021
Decision issued: EIA not required
-
29 Jul 2026
Added to PlanIndex
After the decision
The process from here
The council has decided this application; the published outcome sits in the record above and the decision notice on the council portal carries the detail, including any conditions.
If permission was granted, work must normally begin within three years of the decision. If it was refused, the applicant can appeal within the statutory time limit or submit a revised scheme.
About other applications
How this application type works
This application sits outside the common categories, which can include county matters such as minerals and waste, works by statutory undertakers, demolition notifications and other less frequent procedures. The council record linked below sets out the specific procedure that applies, and the description above is taken directly from the published register.
Nearby applications
Within 500 metres
-
P26/V1674/FUL Granted
Trident Business Park, Building 3 Basil Hill Road Didcot OX11 7HJ
Ground Floor to be separated into 3 separate units. Subdivision of First Floor to form smaller offices. Existing external windows and a selection of Doors to be re-sprayed. Existing substandard entrance/exit doors to be replaced with new doors. Proposed new timber bin store. PV installation to roof.
-
P14/V1447/FUL Decided
2B Trident Park Basil Hill Road Didcot (in the parish of Sutton Courtenay) OX11 7HJ
Change of use to private Health Club/Gym.
-
P26/V1832/A Decided
O K A Purchas Road Didcot OX11 7BF
High level building signage in individual letter to south facade Low level sign above set back entrance to south facade Directional signage board at main entrance from Purchas Road Directional signage board at service yard entrance from Purchas Road Internally illuminated company name/logo pylon on land facing Purchas Road
-
P25/V2462/FUL Decided
Land at Purchas Road, Didcot, OX11 7BF
Demolition of the existing building and structures on site, and all other associated site clearance works. Construction of a data centre building (Class B8) with plant at roof level with an emergency generator (1no.) and associated flue (provided within an external compound adjoining the data centre building), sprinkler tanks and pumphouse, security guard house, and provision of kiosk substation. The development also comprises the construction of a new access and internal road and circulation areas, footpaths, provision of car and bicycle parking, hard and soft landscaping and other associated works and ancillary site infrastructure. Amended plans received 26 March 2026.
-
P26/V0528/FUL Granted
O K A, Purchas Road, Didcot, OX11 7BF
Erection of Electric Vehicle Charging Points and associated ducting.
-
P23/S0472/DIS Decided
Air Products Plc, Hawksworth, Didcot, OX11 7PL
Discharge of conditions 3(Off setting certificate) & 4(Great Crested Newts Compliance) on application P22/S0949/FUL (Construction and operation of a cylinder depot including the widening of the main site access, creation of a hardstanding, construction of a garage, offices and three liquid gas storage tanks, additional helium compressor, new weighbridge and island with fuel dispenser, steel frame canopy for sorting and storage of cylinders, HGV parking bays, internal access road and demolition of the sales building to create additional ancillary staff car parking).
Other other applications
In South Oxfordshire
-
P26/S2355/OH Granted
The Cottage The Copse Mill Lane Kidmore End Reading RG4 9HA
Installaton of a new underground Low Voltage (LV) cable
-
P26/S2338/CM Decided
The Railway Inn, Station Road, Culham, Abingdon, OX14 3BT
Details Pursuant for Oxfordshire County Council for: Details pursuant to Condition No. 5 – topographical plans for the Didcot to Culham River Crossing section of the development (partial discharge) of planning permission no. R3.0138/21 at A linear site comprising a corridor between the A34 Milton Interchange and the B4015 north of Clifton Hampden including part of the A4130 east of the A34 Milton Interchange, land between Didcot and the former Didcot A Power Station and the Great Western Mainline, land to the north of Didcot where it crosses a private railway sidings and the River Thames to the west of Appleford-on-Thames before joining the A415 west of Culham Station, land to the south of Culham Science Centre through to a connection with the B4015 north of Clifton Hampden
-
P26/S2430/CM Decided
Premier Inn, Section Of A4130 Between Milton Interchange And New Farm, Milton, Abingdon, OX14 4TX
Details Pursuant for Oxfordshire County Council , OX1 1ND for: Details pursuant to Condition 24 (Carbon Management Plan) of planning permission no. (R3.0138/21) at A linear site comprising a corridor between the A34 Milton Interchange and the B4015 north of Clifton Hampden including part of the A4130 east of the A34 Milton Interchange, land between Didcot and the former Didcot A Power Station and the Great Western Mainline, land to the north of Didcot where it crosses a private railway sidings and the River Thames to the west of Appleford-on-Thames before joining the A415 west of Culham Station, land to the south of Culham Science Centre through to a connection with the B4015 north of Clifton Hampden
-
P26/S2433/CM Decided
Sewage Treatment Works Sandford-on-thames Oxford OX4 4XU
Details pursuant to Condition 6 (Construction Environmental Management Plan) of planning permission no. MW.0002/26
-
P26/S2869/CM Decided
Sewage Treatment Works Sandford-on-Thames Oxford OX4 4XU
Development of new blower house and sludge processing buildings, a temporary vehicular access from Grenoble Road, and a landscape bund