Skip to content
PlanIndex Get alerts
Menu

Planning application

West Hill House, Henley-on-Thames

Granted South Oxfordshire P19/S3974/TPO Works to TPO

Works: Trees

Permission granted. Work must normally begin within three years of the decision or the permission lapses.

Proposal

T2 (T4 on TPO) - Horse Chestnut - Aerial inspection to assess health of crown. Assess tension of cable brace between the two main upright stems. Carry out a decay detection test using a Picus Tomograph to determine soundness of the stem and decayed areas. Crown clean to remove deadwood, weakand crossing branches. T3 (T3 on TPO) - Lawson Cypress - Lightly tip prune back to previous pruning points to remove any overhang from over the car park area to minimise the birds using the branches as a perch. T6 (T2 on TPO) - Plane - lightly tip prune back to previous pruning points to remove any overhang from over the car park area to minimise the birds using the branches as a perch. T7 (T1 on TPO) - Lime - crown clean to remove deadwood. Aerial inspection to observe historic branch unions. Monitor annually. T8 & T9 (T5 on TPO) - Yew - No immediate work required.

As published by the council, reference P19/S3974/TPO

Application record

Reference
P19/S3974/TPO
Type
Works to TPO
Status
Decision Made
Decision
Granted As published: Consent TPO works
Received
14 Feb 2019
Validated
14 Feb 2019
Decided
25 Mar 2019

Site history

Applications at this address on the South Oxfordshire register

This site has had 2 applications since 2015: 2 approved, 0 refused.

  • P15/S4944/TPO Granted

    West Hill House, Henley-on-Thames

    T4 - Horse Chestnut - Aerial inspection. Reduce the two limbs overhanging the road by up to 40% back to suitable pruning points to reduce the weight. Cable brace the two main upright stems to assist stability. Crown cleanto remove deadwood, weak and crossing branches. Monitor annually. T3 - Lawson Cypress - Lightly tip prune to remoe any overhang from over the car park area to minimise the birds using the branches as a perch. T2 - Plane - Lightly tip prune to remove any overhang from over the car park area to minimise the birds using the branches as a perch. T1 - Lime - Crown clean to remove deadwood. Aerial inspection to observe historic branch unions. Monitor annually. T5 - Yew - No immediate work required. T1 Pollarded Lime Spec: S3 Remove deadwood. Reason: R1 Sound arboricultural management Spec: S5 Remove damaged branches Spec: S6 Remove crossing branches Reason: R1 Sound arboricultural management T2 London Plane Spec: S1 Reduce crown by a maximum of n% and reshape Reason: R1 Sound arboricultural management Spec: S19 Please add the following at the end of all the aprroved works: All pruning cuts must be made at bra Reason: R1 Sound arboricultural management T3 Lawson Cypress Spec: S1 Reduce crown by a maximum of n% and reshape Reason: R1 Sound arboricultural management Spec: S19 Please add the following at the end of all the aprroved works: All pruning cuts must be made at bra Reason: R1 Sound arboricultural management T4 Horse Chestnut Spec: S1 Reduce crown by a maximum of n% and reshape Reason: R1 Sound arboricultural management Spec: S3 Remove deadwood. Spec: S5 Remove damaged branches Spec: S6 Remove crossing branches Spec: S11 Install non-invasive brace Spec: S19 Please add the following at the end of all the aprroved works: All pruning cuts must be made at bra

    Decided 10 Nov 2015 Trees

Timeline

Dates from the published record

  1. 14 Feb 2019

    Received by South Oxfordshire

  2. 25 Mar 2019

    Decision issued: Consent TPO works

  3. 29 Jul 2026

    Added to PlanIndex

What this grant of permission means

South Oxfordshire granted permission on 25 March 2019, subject to any conditions on the decision notice. Work must normally begin within three years or the permission lapses. More in our guide to what happens after a planning decision.

About tree works applications

Applications for works to trees cover protected trees: consent under a tree preservation order, or six weeks notice for trees in a conservation area. More in our guide to planning application types.

In South Oxfordshire

  • P26/S4235/TCA Decided

    Thorpe Farm House Thorpe Street Aston Upthorpe Didcot OX11 9EQ

    T1 - Copper Beech - Reduce branches by approximately 2 metres focusing mainly on lateral branches rather than the top. Lift canopy to provide statutory clearance over the road and clear from service cables. T2 - Tulip Tree - Reduce by approximately 3 metres to restore balance within the crown due to previous limb failure leaving the tree unbalanced. T3 - Horse Chestnut - Reduce by approximately 3 to 4 metres, leaving a natural flowing crown outline and remove major deadwood. T4 - To fell and remove 1 x Yew tree and install eco plugs to prevent re-growth.

    Received 21 Sep, published by the council 2 Oct 2026 Trees
  • P26/S4236/TPO Granted

    1 Sherwood Gardens Henley-on-thames RG9 1QJ

    T1 Copper Beech. Low canopy over road and footpath. To raise canopy to statutory clearances, (5.2m over road, 2.5m over footpath). To remove deadwood greater than 60mm over road and footpath, for safety purposes, minimising any chance for larger falling deadwood in windy conditions.

    Received 21 Sep, published by the council 2 Oct 2026 Trees
  • P26/S4118/TPO Decided

    Johnson Matthey Technology Centre, Blount’s Court Road, Sonning Common RG4 9NH

    Carry out all recommended works as listed within the accompanying tree survey document dated 24/08/26

    Received 14 Sep, published by the council 26 Sep 2026 Trees
  • P26/S4579/TCA Decided

    St Nicholas House 90 High Street Wallingford OX10 0BW

    Magnolia Tree - 1.5m reduce and height and lateral spread to previous pruning points

    Received 7 Oct, published by the council 11 Oct 2026 Trees
  • P26/S4354/TPO Granted

    Henley College Deanfield Avenue Henley-on-thames RG9 1UH

    Ash (T2 of TPO 09/2019) - Reduce back crown over single storey block D4 by a maximum of 4m at its widest point (work mainly relates to over extended limbs over roof). Reduce back low branches over the roof to create 3m clearance. Cutback branches from front of the adjacent building (D6) to create 2-3m clearance. To help balance the crown, reduce remaining crown by approx. 2m. To avoid altering the balance of the tree as a whole, the crown of the tree should be reduced in proportion to its original shape. All pruning cuts must be made at branch junctions, leaving sufficient live growth to maintain or enhance crown form.

    Received 28 Sep, published by the council 11 Oct 2026 Trees