Planning application
NE corner of Paddock, Watlington, Oxon
Works: Trees
Decided. The decision notice on the council portal carries the outcome in full, including any conditions.
Proposal
Birch x 1 Fell Birch x 1 to facilitate installation of small stage/performance platform. Tree location shown as G9 (i) on location plan which is attached as appendix 1. Also see photos at appendix 2. The stage was approved as part of the change ofuse and redesign proposals that were the subject of planning application P00/S0971 but was not installed at the time of the redesign works. See design plan at appendix 3. Having calculated the RPA of existing adjacent trees, the removal of the one birch tree is considered expedient to ensure protection of the remaining trees and ensure future compatibility with the structure. It is proposed to plant a replacement birch (heavy standard) at the front (south) of the two remaining trees comprising G9 as shown on the location plan at appendix 1. Remarks:
As published by the council, reference P19/S3501/TCA
Application record
- Reference
- P19/S3501/TCA
- Type
- Works to trees in CA
- Status
- Decision Made
- Decision
- No obj CA works
- Received
- 19 Feb 2019
- Validated
- 19 Feb 2019
- Decided
- 12 Mar 2019
Timeline
Dates from the published record
-
19 Feb 2019
Received by South Oxfordshire
-
12 Mar 2019
Decision issued: No obj CA works
-
29 Jul 2026
Added to PlanIndex
Documents
Plans, drawings, consultee responses and the officer's report
2 documents on file for this application
A planning file usually holds the application form, drawings and site plans, consultee responses, the officer's report and the decision notice.
Watch members (£5 a month) open the document list from here.
Open the documentsAfter the decision
South Oxfordshire has decided this application; the outcome above is the register's own wording and the decision notice on the council portal carries the detail. More in our guide to what happens after a planning decision.
About tree works applications
Applications for works to trees cover protected trees: consent under a tree preservation order, or six weeks notice for trees in a conservation area. More in our guide to planning application types.
Other tree works applications
In South Oxfordshire
-
P26/S4235/TCA Decided
Thorpe Farm House Thorpe Street Aston Upthorpe Didcot OX11 9EQ
T1 - Copper Beech - Reduce branches by approximately 2 metres focusing mainly on lateral branches rather than the top. Lift canopy to provide statutory clearance over the road and clear from service cables. T2 - Tulip Tree - Reduce by approximately 3 metres to restore balance within the crown due to previous limb failure leaving the tree unbalanced. T3 - Horse Chestnut - Reduce by approximately 3 to 4 metres, leaving a natural flowing crown outline and remove major deadwood. T4 - To fell and remove 1 x Yew tree and install eco plugs to prevent re-growth.
-
P26/S4236/TPO Granted
1 Sherwood Gardens Henley-on-thames RG9 1QJ
T1 Copper Beech. Low canopy over road and footpath. To raise canopy to statutory clearances, (5.2m over road, 2.5m over footpath). To remove deadwood greater than 60mm over road and footpath, for safety purposes, minimising any chance for larger falling deadwood in windy conditions.
-
P26/S4118/TPO Decided
Johnson Matthey Technology Centre, Blount’s Court Road, Sonning Common RG4 9NH
Carry out all recommended works as listed within the accompanying tree survey document dated 24/08/26
-
P26/S4579/TCA Decided
St Nicholas House 90 High Street Wallingford OX10 0BW
Magnolia Tree - 1.5m reduce and height and lateral spread to previous pruning points
-
P26/S4354/TPO Granted
Henley College Deanfield Avenue Henley-on-thames RG9 1UH
Ash (T2 of TPO 09/2019) - Reduce back crown over single storey block D4 by a maximum of 4m at its widest point (work mainly relates to over extended limbs over roof). Reduce back low branches over the roof to create 3m clearance. Cutback branches from front of the adjacent building (D6) to create 2-3m clearance. To help balance the crown, reduce remaining crown by approx. 2m. To avoid altering the balance of the tree as a whole, the crown of the tree should be reduced in proportion to its original shape. All pruning cuts must be made at branch junctions, leaving sufficient live growth to maintain or enhance crown form.