Berins Hill Wood, Berins Hill, Ipsden

This site has had 3 applications since 2015: 3 approved, 0 refused.

• P17/S5008/TPO Granted

  Berins Hill Wood, Berins Hill, Ipsden

  Sycamores - fell because of excessive regeneration of non-native species in protected native woodland. All trees in the group are squirrel damaged. Owner more than willing to replant with more native trees. Horse Chestnut - fell. W1 Mixed species woodland Beech, Oak, Ash, Fir, Pine Spec: S15 G1 Fell tree to ground level. Reason: R2 G1 and T1To ensure future compatibility with site, surroundings and usage Spec: S15 T1 Fell tree to ground level. Reason: R2 G1 and T1To ensure future compatibility with site, surroundings and usage

  Decided 6 Jul 2017 Trees
• P15/S4825/TPO Granted

  Berins Hill Wood, Berins Hill, Ipsden

  Group of trees (G1) crown thin by up to 15% to remove weak and damaged branches and allow light penetration of woodland floor. Fell self sown sycamore saplings (G2) to prevent establishment.

  Decided 10 Nov 2015 Trees

1. 29 Jan 2018

   Received by South Oxfordshire

2. 14 Mar 2018

   Decision issued: Consent TPO works

3. 15 Aug 2026

   Added to PlanIndex

South Oxfordshire granted permission on 14 March 2018, subject to any conditions on the decision notice. Work must normally begin within three years or the permission lapses. More in our guide to what happens after a planning decision.

Applications for works to trees cover protected trees: consent under a tree preservation order, or six weeks notice for trees in a conservation area. More in our guide to planning application types.

• P26/S4235/TCA Decided

  Thorpe Farm House Thorpe Street Aston Upthorpe Didcot OX11 9EQ

  T1 - Copper Beech - Reduce branches by approximately 2 metres focusing mainly on lateral branches rather than the top. Lift canopy to provide statutory clearance over the road and clear from service cables. T2 - Tulip Tree - Reduce by approximately 3 metres to restore balance within the crown due to previous limb failure leaving the tree unbalanced. T3 - Horse Chestnut - Reduce by approximately 3 to 4 metres, leaving a natural flowing crown outline and remove major deadwood. T4 - To fell and remove 1 x Yew tree and install eco plugs to prevent re-growth.

  Received 21 Sep, published by the council 2 Oct 2026 Trees
• P26/S4236/TPO Granted

  1 Sherwood Gardens Henley-on-thames RG9 1QJ

  T1 Copper Beech. Low canopy over road and footpath. To raise canopy to statutory clearances, (5.2m over road, 2.5m over footpath). To remove deadwood greater than 60mm over road and footpath, for safety purposes, minimising any chance for larger falling deadwood in windy conditions.

  Received 21 Sep, published by the council 2 Oct 2026 Trees
• P26/S4118/TPO Decided

  Johnson Matthey Technology Centre, Blount’s Court Road, Sonning Common RG4 9NH

  Carry out all recommended works as listed within the accompanying tree survey document dated 24/08/26

  Received 14 Sep, published by the council 26 Sep 2026 Trees
• P26/S4579/TCA Decided

  St Nicholas House 90 High Street Wallingford OX10 0BW

  Magnolia Tree - 1.5m reduce and height and lateral spread to previous pruning points

  Received 7 Oct, published by the council 11 Oct 2026 Trees
• P26/S4354/TPO Granted

  Henley College Deanfield Avenue Henley-on-thames RG9 1UH

  Ash (T2 of TPO 09/2019) - Reduce back crown over single storey block D4 by a maximum of 4m at its widest point (work mainly relates to over extended limbs over roof). Reduce back low branches over the roof to create 3m clearance. Cutback branches from front of the adjacent building (D6) to create 2-3m clearance. To help balance the crown, reduce remaining crown by approx. 2m. To avoid altering the balance of the tree as a whole, the crown of the tree should be reduced in proportion to its original shape. All pruning cuts must be made at branch junctions, leaving sufficient live growth to maintain or enhance crown form.

  Received 28 Sep, published by the council 11 Oct 2026 Trees