Planning application
1b Windmill Lane, Wheatley
Works: Trees
Decided. The decision notice on the council portal carries the outcome in full, including any conditions.
Proposal
Tree is beech tree immediately on left as you turn into Windmill Lane from Ladder Hill. Approx 15m from the junction with Ladder Hill. From the arborist (Tim O'Connor - Arbor Tree Specialists) description of works, T1 - Beech. Early mature. Tip reduce on house side, balance crown on road side to match. Crown lift to 3m and thin crown by 15%. Small to medium sized specimen adjacent to property. Deadwood present and a large amount of crossing/rubbing branches. Branch tips very close to building and roof and in need to tipping back to prevent future issues with damage caused by contact with roof. T1 Beech Spec: S1 Evenly reduce lateral spread by 2m, Pruning cuts should not exceed 50mm. Works equating to 15% of tr Spec: S3 Remove deadwood. Spec: S7 Lift crown to a height of 3 above ground level, by removing branch tips only Spec: S8 Prune back to suitable secondary branches to ensure 2m clearance from building. Spec: S9 Head back to suitable secondary branches to ensure 0.3m clearance from wires. Spec: S19 Please add the following at the end of all the aprroved works: All pruning cuts must be made at bra Reason: R1 Sound arboricultural management
As published by the council, reference P17/S5162/TPO
Application record
- Reference
- P17/S5162/TPO
- Type
- Works to TPO
- Status
- Decision Made
- Decision
- Cons. TPO amd. spec.
- Received
- 15 Feb 2017
- Validated
- 15 Feb 2017
- Decided
- 30 Mar 2017
Timeline
Dates from the published record
-
15 Feb 2017
Received by South Oxfordshire
-
30 Mar 2017
Decision issued: Cons. TPO amd. spec.
-
27 Aug 2026
Added to PlanIndex
After the decision
South Oxfordshire has decided this application; the outcome above is the register's own wording and the decision notice on the council portal carries the detail. More in our guide to what happens after a planning decision.
About tree works applications
Applications for works to trees cover protected trees: consent under a tree preservation order, or six weeks notice for trees in a conservation area. More in our guide to planning application types.
Other tree works applications
In South Oxfordshire
-
P26/S4235/TCA Decided
Thorpe Farm House Thorpe Street Aston Upthorpe Didcot OX11 9EQ
T1 - Copper Beech - Reduce branches by approximately 2 metres focusing mainly on lateral branches rather than the top. Lift canopy to provide statutory clearance over the road and clear from service cables. T2 - Tulip Tree - Reduce by approximately 3 metres to restore balance within the crown due to previous limb failure leaving the tree unbalanced. T3 - Horse Chestnut - Reduce by approximately 3 to 4 metres, leaving a natural flowing crown outline and remove major deadwood. T4 - To fell and remove 1 x Yew tree and install eco plugs to prevent re-growth.
-
P26/S4236/TPO Granted
1 Sherwood Gardens Henley-on-thames RG9 1QJ
T1 Copper Beech. Low canopy over road and footpath. To raise canopy to statutory clearances, (5.2m over road, 2.5m over footpath). To remove deadwood greater than 60mm over road and footpath, for safety purposes, minimising any chance for larger falling deadwood in windy conditions.
-
P26/S4118/TPO Decided
Johnson Matthey Technology Centre, Blount’s Court Road, Sonning Common RG4 9NH
Carry out all recommended works as listed within the accompanying tree survey document dated 24/08/26
-
P26/S4579/TCA Decided
St Nicholas House 90 High Street Wallingford OX10 0BW
Magnolia Tree - 1.5m reduce and height and lateral spread to previous pruning points
-
P26/S4354/TPO Granted
Henley College Deanfield Avenue Henley-on-thames RG9 1UH
Ash (T2 of TPO 09/2019) - Reduce back crown over single storey block D4 by a maximum of 4m at its widest point (work mainly relates to over extended limbs over roof). Reduce back low branches over the roof to create 3m clearance. Cutback branches from front of the adjacent building (D6) to create 2-3m clearance. To help balance the crown, reduce remaining crown by approx. 2m. To avoid altering the balance of the tree as a whole, the crown of the tree should be reduced in proportion to its original shape. All pruning cuts must be made at branch junctions, leaving sufficient live growth to maintain or enhance crown form.