Planning application
Lowfield House, 10 Churchfield Lane, Benson, Oxon
Works: Trees Small domestic
Read from the description, not a valuation. How we read the register
Decided. The decision notice on the council portal carries the outcome in full, including any conditions.
Proposal
T3 - Weeping Willow to restructure to 3m below historic topping points and reshape to allow for future growth to mitigate risk of failure. T4 & 5 - Two dead trees behind shed to fell to ground level. T1 - Beech tree by building to dismantle in sections to ground level. Potentially unstable fork union at crown break. Tree is not sustainable long term and notwithstanding the weak union the tree is too close to the building to be sustainable long term without constant management pruning. T2 - Pine tree to reduce lowest limb by 1-1.5m to mitigate risk of failure. T1 Beech Spec: S16 Fell tree to ground level and grind stump. Reason: R4 To address potential hazard Reason: R6 Poor, structural condition T2 Pine Spec: S1 Reduce lowest limb by 1-1.5m Reason: R2 To ensure future compatibility with site, surroundings and usage T3 Willow Spec: S1 Reduce to 3m below historic topping points. Reason: R2 To ensure future compatibility with site, surroundings and usage
As published by the council, reference P17/S5074/TPO
Application record
- Reference
- P17/S5074/TPO
- Type
- Works to TPO
- Status
- Decision Made
- Decision
- Cons. TPO amd. spec.
- Received
- 10 Mar 2017
- Validated
- 10 Mar 2017
- Decided
- 28 Apr 2017
Timeline
Dates from the published record
-
10 Mar 2017
Received by South Oxfordshire
-
28 Apr 2017
Decision issued: Cons. TPO amd. spec.
-
27 Aug 2026
Added to PlanIndex
After the decision
South Oxfordshire has decided this application; the outcome above is the register's own wording and the decision notice on the council portal carries the detail. More in our guide to what happens after a planning decision.
About tree works applications
Applications for works to trees cover protected trees: consent under a tree preservation order, or six weeks notice for trees in a conservation area. More in our guide to planning application types.
Other tree works applications
In South Oxfordshire
-
P26/S4235/TCA Decided
Thorpe Farm House Thorpe Street Aston Upthorpe Didcot OX11 9EQ
T1 - Copper Beech - Reduce branches by approximately 2 metres focusing mainly on lateral branches rather than the top. Lift canopy to provide statutory clearance over the road and clear from service cables. T2 - Tulip Tree - Reduce by approximately 3 metres to restore balance within the crown due to previous limb failure leaving the tree unbalanced. T3 - Horse Chestnut - Reduce by approximately 3 to 4 metres, leaving a natural flowing crown outline and remove major deadwood. T4 - To fell and remove 1 x Yew tree and install eco plugs to prevent re-growth.
-
P26/S4236/TPO Granted
1 Sherwood Gardens Henley-on-thames RG9 1QJ
T1 Copper Beech. Low canopy over road and footpath. To raise canopy to statutory clearances, (5.2m over road, 2.5m over footpath). To remove deadwood greater than 60mm over road and footpath, for safety purposes, minimising any chance for larger falling deadwood in windy conditions.
-
P26/S4118/TPO Decided
Johnson Matthey Technology Centre, Blount’s Court Road, Sonning Common RG4 9NH
Carry out all recommended works as listed within the accompanying tree survey document dated 24/08/26
-
P26/S4579/TCA Decided
St Nicholas House 90 High Street Wallingford OX10 0BW
Magnolia Tree - 1.5m reduce and height and lateral spread to previous pruning points
-
P26/S4354/TPO Granted
Henley College Deanfield Avenue Henley-on-thames RG9 1UH
Ash (T2 of TPO 09/2019) - Reduce back crown over single storey block D4 by a maximum of 4m at its widest point (work mainly relates to over extended limbs over roof). Reduce back low branches over the roof to create 3m clearance. Cutback branches from front of the adjacent building (D6) to create 2-3m clearance. To help balance the crown, reduce remaining crown by approx. 2m. To avoid altering the balance of the tree as a whole, the crown of the tree should be reduced in proportion to its original shape. All pruning cuts must be made at branch junctions, leaving sufficient live growth to maintain or enhance crown form.