Planning application
Badgemore Park Golf Club
Works: Trees
Permission granted. Work must normally begin within three years of the decision or the permission lapses.
Proposal
Oak tree - maintenance of Oak tree over barn digging small trench adjacent to trees, tree overhanging barn branches and bits falling damaging roof. G19 4 Maple, 5 Oak, 3 Ash Spec: S1 T1 Oak, reduce braches over building by approximately 1-2m Reason: R1 T1 Sound arboricultural management Reason: R1 Various Sound arboricultural management Spec: S1 Various, trench within root protection areas of adjacent trees Reason: R1 T1 Sound arboricultural management Reason: R1 Various Sound arboricultural management
As published by the council, reference P17/S5055/TPO
Application record
- Reference
- P17/S5055/TPO
- Type
- Works to TPO
- Status
- Decision Made
- Decision
- Granted As published: Consent TPO works
- Received
- 26 Jan 2017
- Validated
- 26 Jan 2017
- Decided
- 2 Feb 2017
Site history
Applications at this address on the South Oxfordshire register
This site has had 2 applications since 2014: 2 approved, 0 refused.
-
P14/S4662/TPO Granted
Badgemore Park Golf Club
T10 - Sycamore - fell. reason: please refer to accompanying report. T38 - Turkey Oak - crown reduce all over by up to 4m. Reason: to improve playability and reduce wind loading; extensive colonisation by root and butt decay funghi (Ganoderma spp). G23 - Mixed group - fell one holly, one beech and one sycamore. Reason: please refer to accompanying report. G24 - Mixed group - fell one lime and one london plane. Reason: please refer to accompanying report. W6 - Woodland - fell five trees and prune three trees (detailed work specification contained in accompaying report). Reason: please refer to accompanying report.
Timeline
Dates from the published record
-
26 Jan 2017
Received by South Oxfordshire
-
2 Feb 2017
Decision issued: Consent TPO works
-
27 Aug 2026
Added to PlanIndex
What this grant of permission means
South Oxfordshire granted permission on 2 February 2017, subject to any conditions on the decision notice. Work must normally begin within three years or the permission lapses. More in our guide to what happens after a planning decision.
About tree works applications
Applications for works to trees cover protected trees: consent under a tree preservation order, or six weeks notice for trees in a conservation area. More in our guide to planning application types.
Other tree works applications
In South Oxfordshire
-
P26/S4235/TCA Decided
Thorpe Farm House Thorpe Street Aston Upthorpe Didcot OX11 9EQ
T1 - Copper Beech - Reduce branches by approximately 2 metres focusing mainly on lateral branches rather than the top. Lift canopy to provide statutory clearance over the road and clear from service cables. T2 - Tulip Tree - Reduce by approximately 3 metres to restore balance within the crown due to previous limb failure leaving the tree unbalanced. T3 - Horse Chestnut - Reduce by approximately 3 to 4 metres, leaving a natural flowing crown outline and remove major deadwood. T4 - To fell and remove 1 x Yew tree and install eco plugs to prevent re-growth.
-
P26/S4236/TPO Granted
1 Sherwood Gardens Henley-on-thames RG9 1QJ
T1 Copper Beech. Low canopy over road and footpath. To raise canopy to statutory clearances, (5.2m over road, 2.5m over footpath). To remove deadwood greater than 60mm over road and footpath, for safety purposes, minimising any chance for larger falling deadwood in windy conditions.
-
P26/S4118/TPO Decided
Johnson Matthey Technology Centre, Blount’s Court Road, Sonning Common RG4 9NH
Carry out all recommended works as listed within the accompanying tree survey document dated 24/08/26
-
P26/S4579/TCA Decided
St Nicholas House 90 High Street Wallingford OX10 0BW
Magnolia Tree - 1.5m reduce and height and lateral spread to previous pruning points
-
P26/S4354/TPO Granted
Henley College Deanfield Avenue Henley-on-thames RG9 1UH
Ash (T2 of TPO 09/2019) - Reduce back crown over single storey block D4 by a maximum of 4m at its widest point (work mainly relates to over extended limbs over roof). Reduce back low branches over the roof to create 3m clearance. Cutback branches from front of the adjacent building (D6) to create 2-3m clearance. To help balance the crown, reduce remaining crown by approx. 2m. To avoid altering the balance of the tree as a whole, the crown of the tree should be reduced in proportion to its original shape. All pruning cuts must be made at branch junctions, leaving sufficient live growth to maintain or enhance crown form.