Planning application
Ladygrove, DIDCOT
Works: Trees
Permission granted. Work must normally begin within three years of the decision or the permission lapses.
Proposal
T26 - Oak T27 - Ash Thinning and removal of any deadwood to a maximum of 10-15%. T26 Oak Spec: S2 Thin crown by a maximum of 10% retaining an even density of foliage throughout a well-spaced and ba Spec: S3 Remove deadwood. Spec: S19 Please add the following at the end of all the aprroved works: All pruning cuts must be made at bra Reason: R1 Sound arboricultural management T27 Ash Spec: S2 Thin crown by a maximum of 10% retaining an even density of foliage throughout a well-spaced and ba Spec: S3 Remove deadwood. Spec: S19 Please add the following at the end of all the aprroved works: All pruning cuts must be made at bra Reason: R1 Sound arboricultural management
As published by the council, reference P17/S4996/TPO
Application record
- Reference
- P17/S4996/TPO
- Type
- Works to TPO
- Status
- Decision Made
- Decision
- Granted As published: Consent TPO works
- Received
- 6 Mar 2017
- Validated
- 6 Mar 2017
- Decided
- 13 Apr 2017
Site history
Applications at this address on the South Oxfordshire register
This site has had 6 applications since 2014: 2 approved, 1 refused.
-
P17/S4997/TPO Refused
Ladygrove, DIDCOT
T24 - Oak - reduce the canopy of the Oak tree from 18m to 15.5m in height and reduce the width from 15m to 12m to increase light into the flats and take the Oak away from the flats. T25 - Oak - reduce the canopy of the Oak tree from 17m to 14.5m in height and reduce the width from 18m to 15m to increase the light to the flats and also take the oak tree away from the buildings. Mixed species T3 - lift the canopies of the mixed Birch and Maple to a height of 2.5m to increase light to the ground floor flats and lift the canopies overhanging the footpath and road to 3.5m. T1 Oak Spec: S12 Prune back to previous pruning points Spec: S19 Please add the following at the end of all the aprroved works: All pruning cuts must be made at bra Reason: R2 To ensure future compatibility with site, surroundings and usage T2 Oak Spec: S1 Evenly reduce lateral spread by approx 2m. Pruning cuts should not exceed 75mm Spec: S12 Prune back to previous pruning points Spec: S19 Please add the following at the end of all the aprroved works: All pruning cuts must be made at bra
-
P16/S4864/TPO Decided
Ladygrove, DIDCOT
T31 - Oak - remove large branch overhanging garden due to falling branches and danger to life. Some thining (20%) to allow more light into the garden. Also to remove dead branches. T32 - Field Maple - remove branches within 6-10 ft of the house to allow more light and no damage to recently refurbished facias and guttering. T1 Oak Spec: S1 Reduce crown by a maximum of n% and reshape Spec: S2 Thin crown by a maximum of % retaining an even density of foliage throughout a well-spaced and ba Spec: S3 Remove deadwood. Spec: S5 Remove damaged branches Spec: S6 Remove crossing branches Spec: S19 Please add the following at the end of all the aprroved works: All pruning cuts must be made at bra T3 Field Maple Spec: S2 Thin crown by a maximum of % retaining an even density of foliage throughout a well-spaced and ba Spec: S3 Remove deadwood. Spec: S5 Remove damaged branches Spec: S6 Remove crossing branches Spec: S8 Prune back to suitable secondary branches to ensure m clearance from building.
-
P15/S4818/TPO Decided
Ladygrove, DIDCOT
T1 - Oak - Cut ivy at base so it may die naturally. Also lift the crown and reduce up to 4 metres. Due to removal of both field maples. T2 - Field Maple- fell because of rot T3 - Field Maple - fell because of rot T1 Oak Spec: S7 Lift crown to a height of above ground level, by removing branch tips only , by removing bran Reason: R1 Sound arboricultural management Reason: R2 To ensure future compatibility with site, surroundings and usage Spec: S17 Girdle ivy Spec: S19 Please add the following at the end of all the aprroved works: All pruning cuts must be made at bra T3 Field Maple Spec: S16 Fell tree to ground level and grind stump. Reason: R1 Sound arboricultural management Reason: R2 To ensure future compatibility with site, surroundings and usage Reason: R4 To address potential hazard Reason: R6 Poor health, structural condition of form (delete as appropriate)
-
P15/S4817/TPO Granted
Ladygrove, DIDCOT
3 x Field Maple (G1) - Lift/remove epicormic growth in garden because of excessive shading and rapid growth. Reduce crowns up to 4m again for excessive shading but also safety in case a tree should fall. Cut/remove ivy. Excessive growth and unable to determine complete health of the trees. Lift/remove epicormic growth. Reduce crowns up to 4m. Waste to be removed from site. G1 4 Field Maple, 1 Oak Species Spec: S1 Reduce crown by a maximum of n% and reshape Spec: S7 Lift crown to a height of 4m above ground level, by removing branch tips only , by removing bran Spec: S19 Please add the following at the end of all the aprroved works: All pruning cuts must be made at bra Reason: R1 Sound arboricultural management Reason: R2 To ensure future compatibility with site, surroundings and usage T1 Oak Spec: T3 Field Maple Spec:
-
P14/S4590/TPO Decided
Ladygrove, DIDCOT
T28 - Fell as close to ground level as possible and treat the stump.
Timeline
Dates from the published record
-
6 Mar 2017
Received by South Oxfordshire
-
13 Apr 2017
Decision issued: Consent TPO works
-
27 Aug 2026
Added to PlanIndex
What this grant of permission means
South Oxfordshire granted permission on 13 April 2017, subject to any conditions on the decision notice. Work must normally begin within three years or the permission lapses. More in our guide to what happens after a planning decision.
About tree works applications
Applications for works to trees cover protected trees: consent under a tree preservation order, or six weeks notice for trees in a conservation area. More in our guide to planning application types.
Other tree works applications
In South Oxfordshire
-
P26/S4235/TCA Decided
Thorpe Farm House Thorpe Street Aston Upthorpe Didcot OX11 9EQ
T1 - Copper Beech - Reduce branches by approximately 2 metres focusing mainly on lateral branches rather than the top. Lift canopy to provide statutory clearance over the road and clear from service cables. T2 - Tulip Tree - Reduce by approximately 3 metres to restore balance within the crown due to previous limb failure leaving the tree unbalanced. T3 - Horse Chestnut - Reduce by approximately 3 to 4 metres, leaving a natural flowing crown outline and remove major deadwood. T4 - To fell and remove 1 x Yew tree and install eco plugs to prevent re-growth.
-
P26/S4236/TPO Granted
1 Sherwood Gardens Henley-on-thames RG9 1QJ
T1 Copper Beech. Low canopy over road and footpath. To raise canopy to statutory clearances, (5.2m over road, 2.5m over footpath). To remove deadwood greater than 60mm over road and footpath, for safety purposes, minimising any chance for larger falling deadwood in windy conditions.
-
P26/S4118/TPO Decided
Johnson Matthey Technology Centre, Blount’s Court Road, Sonning Common RG4 9NH
Carry out all recommended works as listed within the accompanying tree survey document dated 24/08/26
-
P26/S4579/TCA Decided
St Nicholas House 90 High Street Wallingford OX10 0BW
Magnolia Tree - 1.5m reduce and height and lateral spread to previous pruning points
-
P26/S4354/TPO Granted
Henley College Deanfield Avenue Henley-on-thames RG9 1UH
Ash (T2 of TPO 09/2019) - Reduce back crown over single storey block D4 by a maximum of 4m at its widest point (work mainly relates to over extended limbs over roof). Reduce back low branches over the roof to create 3m clearance. Cutback branches from front of the adjacent building (D6) to create 2-3m clearance. To help balance the crown, reduce remaining crown by approx. 2m. To avoid altering the balance of the tree as a whole, the crown of the tree should be reduced in proportion to its original shape. All pruning cuts must be made at branch junctions, leaving sufficient live growth to maintain or enhance crown form.