From West of Slade Road northwards to Mendip Heights, DIDCOT

This site has had 5 applications since 2014: 4 approved, 0 refused.

• P17/S4976/TPO Granted

  From West of Slade Road northwards to Mendip Heights, DIDCOT

  Oak tree - canopy to be lightly reduced by 1.5m on all sides and crown clean.

  Decided 13 Dec 2017 Trees
• P16/S4842/TPO Granted

  From West of Slade Road northwards to Mendip Heights, DIDCOT

  G7- Large Oak - cutting back branches - branches starting to make contact with the roof and some have broken in the wind. G7 The group comprising 19 oak, 5 maple, 3 poplar Spec: S1 Reduce crown height by 1-2m, Evenly reduce lateral spread by 1-1.5m. Pruning cuts not exceed 50mm Spec: S3 Remove deadwood. Spec: S5 Remove damaged branches Spec: S8 Prune back to suitable secondary branches to ensure 2m clearance from building. Spec: S19 Please add the following at the end of all the aprroved works: All pruning cuts must be made at bra Reason: R1 Sound arboricultural management Reason: R2 To ensure future compatibility with site, surroundings and usage Reason: R7 Close to building, services, road or public highway (delete as appropriate) Reason: R8 Blocking light

  Decided 7 Sep 2016 Trees
• P16/S4841/TPO Granted

  From West of Slade Road northwards to Mendip Heights, DIDCOT

  G5- Oak- Crown Thin By 10%

  Decided 8 Jun 2016 Trees
• P14/S4574/TPO Granted

  From West of Slade Road northwards to Mendip Heights, DIDCOT

  Norway Maple - Requested works - lateral canopy reduction on the western side of the tree by a maximum of 2m. All pruning cuts will be made at suitable branch junctions and no pruning cuts will be greater than 100mm.

  Decided 19 Aug 2014 Trees

1. 7 Jul 2017

   Received by South Oxfordshire

2. 23 Aug 2026

   Added to PlanIndex

The applicant withdrew this application before South Oxfordshire decided it, and is free to submit a revised scheme at any time. More in our guide to what happens after a planning decision.

Applications for works to trees cover protected trees: consent under a tree preservation order, or six weeks notice for trees in a conservation area. More in our guide to planning application types.

• P26/S4235/TCA Decided

  Thorpe Farm House Thorpe Street Aston Upthorpe Didcot OX11 9EQ

  T1 - Copper Beech - Reduce branches by approximately 2 metres focusing mainly on lateral branches rather than the top. Lift canopy to provide statutory clearance over the road and clear from service cables. T2 - Tulip Tree - Reduce by approximately 3 metres to restore balance within the crown due to previous limb failure leaving the tree unbalanced. T3 - Horse Chestnut - Reduce by approximately 3 to 4 metres, leaving a natural flowing crown outline and remove major deadwood. T4 - To fell and remove 1 x Yew tree and install eco plugs to prevent re-growth.

  Received 21 Sep, published by the council 2 Oct 2026 Trees
• P26/S4236/TPO Granted

  1 Sherwood Gardens Henley-on-thames RG9 1QJ

  T1 Copper Beech. Low canopy over road and footpath. To raise canopy to statutory clearances, (5.2m over road, 2.5m over footpath). To remove deadwood greater than 60mm over road and footpath, for safety purposes, minimising any chance for larger falling deadwood in windy conditions.

  Received 21 Sep, published by the council 2 Oct 2026 Trees
• P26/S4118/TPO Decided

  Johnson Matthey Technology Centre, Blount’s Court Road, Sonning Common RG4 9NH

  Carry out all recommended works as listed within the accompanying tree survey document dated 24/08/26

  Received 14 Sep, published by the council 26 Sep 2026 Trees
• P26/S4579/TCA Decided

  St Nicholas House 90 High Street Wallingford OX10 0BW

  Magnolia Tree - 1.5m reduce and height and lateral spread to previous pruning points

  Received 7 Oct, published by the council 11 Oct 2026 Trees
• P26/S4354/TPO Granted

  Henley College Deanfield Avenue Henley-on-thames RG9 1UH

  Ash (T2 of TPO 09/2019) - Reduce back crown over single storey block D4 by a maximum of 4m at its widest point (work mainly relates to over extended limbs over roof). Reduce back low branches over the roof to create 3m clearance. Cutback branches from front of the adjacent building (D6) to create 2-3m clearance. To help balance the crown, reduce remaining crown by approx. 2m. To avoid altering the balance of the tree as a whole, the crown of the tree should be reduced in proportion to its original shape. All pruning cuts must be made at branch junctions, leaving sufficient live growth to maintain or enhance crown form.

  Received 28 Sep, published by the council 11 Oct 2026 Trees