Planning application
71 & 73 Lower Icknield Way, Chinnor, Oxon
Works: Trees
Withdrawn before a decision, so it carries no planning weight. A revised scheme can be submitted at any time.
Proposal
T1 - Walnut - Represents potential danger from collapsed limbs, wishing to remove the tree completely
As published by the council, reference P16/S4932/TPO
Application record
- Reference
- P16/S4932/TPO
- Type
- Works to TPO
- Status
- Withdrawn
- Decision
- Application is not yet decided
- Received
- 8 Jan 2016
- Validated
- 8 Jan 2016
Site history
Applications at this address on the South Oxfordshire register
This site has had 2 applications since 2016: 1 approved, 0 refused.
-
P17/S5072/TPO Granted
71 & 73 Lower Icknield Way, Chinnor, Oxon
Walnut Tree - We wish to carry out the following works: 1. Reduce overall crown height by approximately 1-2m. 2. Evenly reduce lateral spread by approximately 2-3m around the perimeter of the canopy. 3. Remove stubs. 4. Remove deadwood. All of the above works will be made at branch junctions, leaving sufficient live grown to maintain the crown form of the tree. T1 Walnut Spec: S1 Reduce crown height by 1-2m, Evenly reduce lateral spread by 2-3m. Pruning cuts not exceed 75mm Spec: S3 Remove deadwood. Spec: S19 Please add the following at the end of all the aprroved works: All pruning cuts must be made at bra Reason: R1 Sound arboricultural management Reason: R2 To ensure future compatibility with site, surroundings and usage Reason: R7 Close to building
Timeline
Dates from the published record
-
8 Jan 2016
Received by South Oxfordshire
-
12 Sep 2026
Added to PlanIndex
What withdrawal means
The applicant withdrew this application before South Oxfordshire decided it, and is free to submit a revised scheme at any time. More in our guide to what happens after a planning decision.
About tree works applications
Applications for works to trees cover protected trees: consent under a tree preservation order, or six weeks notice for trees in a conservation area. More in our guide to planning application types.
Other tree works applications
In South Oxfordshire
-
P26/S4235/TCA Decided
Thorpe Farm House Thorpe Street Aston Upthorpe Didcot OX11 9EQ
T1 - Copper Beech - Reduce branches by approximately 2 metres focusing mainly on lateral branches rather than the top. Lift canopy to provide statutory clearance over the road and clear from service cables. T2 - Tulip Tree - Reduce by approximately 3 metres to restore balance within the crown due to previous limb failure leaving the tree unbalanced. T3 - Horse Chestnut - Reduce by approximately 3 to 4 metres, leaving a natural flowing crown outline and remove major deadwood. T4 - To fell and remove 1 x Yew tree and install eco plugs to prevent re-growth.
-
P26/S4236/TPO Granted
1 Sherwood Gardens Henley-on-thames RG9 1QJ
T1 Copper Beech. Low canopy over road and footpath. To raise canopy to statutory clearances, (5.2m over road, 2.5m over footpath). To remove deadwood greater than 60mm over road and footpath, for safety purposes, minimising any chance for larger falling deadwood in windy conditions.
-
P26/S4118/TPO Decided
Johnson Matthey Technology Centre, Blount’s Court Road, Sonning Common RG4 9NH
Carry out all recommended works as listed within the accompanying tree survey document dated 24/08/26
-
P26/S4579/TCA Decided
St Nicholas House 90 High Street Wallingford OX10 0BW
Magnolia Tree - 1.5m reduce and height and lateral spread to previous pruning points
-
P26/S4354/TPO Granted
Henley College Deanfield Avenue Henley-on-thames RG9 1UH
Ash (T2 of TPO 09/2019) - Reduce back crown over single storey block D4 by a maximum of 4m at its widest point (work mainly relates to over extended limbs over roof). Reduce back low branches over the roof to create 3m clearance. Cutback branches from front of the adjacent building (D6) to create 2-3m clearance. To help balance the crown, reduce remaining crown by approx. 2m. To avoid altering the balance of the tree as a whole, the crown of the tree should be reduced in proportion to its original shape. All pruning cuts must be made at branch junctions, leaving sufficient live growth to maintain or enhance crown form.