Planning application
Permagon Press
Works: Trees
Decided. The decision notice on the council portal carries the outcome in full, including any conditions.
Proposal
T1 - Horse Chestnut - on land adjoining 22 Fairfax Gate. Reduce canopy by 10% equating to approximately 0.75-1m from branch tips. Reduce lateral to south by 1-1.5m. Reduce lateral to west by 1.5-2m, raise canopy to 3.5-4m. All pruning to remove only secondary branch structure and no pruning cuts to exceed 75mm diameter. Foliar removal not to exceed 30% of total in accordance with BS 3998/2010. Works are to keep tree in scale with setting, improve light ingress and mitigate hazard posed by 2 x over extended limbs. T1 Horse Chestnut Spec: S1 Reduce crown by a maximum of n% and reshape Reason: R1 Sound arboricultural management Reason: R2 To ensure future compatibility with site, surroundings and usage Spec: S19 Please add the following at the end of all the aprroved works: All pruning cuts must be made at bra
As published by the council, reference P15/S4943/TPO
Application record
- Reference
- P15/S4943/TPO
- Type
- Works to TPO
- Status
- Under Consideration
- Decision
- Application is not yet decided
- Received
- 11 Nov 2015
- Validated
- 11 Nov 2015
Site history
Applications at this address on the South Oxfordshire register
This site has had 2 applications since 2015: 1 approved, 0 refused.
-
P17/S5138/TPO Granted
Permagon Press
T1 - Sycamore - large tree in relatively small garden. Reduce and reshape one Sycamore by up to 1.5-2m from each branch reducing canopy spread from 5m to 4m, pruning back to suitable branch junctions to allow more light filtration to garden and adjacent garden.
Timeline
Dates from the published record
-
11 Nov 2015
Received by South Oxfordshire
-
15 Sep 2026
Added to PlanIndex
After the decision
South Oxfordshire has decided this application; the outcome above is the register's own wording and the decision notice on the council portal carries the detail. More in our guide to what happens after a planning decision.
About tree works applications
Applications for works to trees cover protected trees: consent under a tree preservation order, or six weeks notice for trees in a conservation area. More in our guide to planning application types.
Other tree works applications
In South Oxfordshire
-
P26/S4235/TCA Decided
Thorpe Farm House Thorpe Street Aston Upthorpe Didcot OX11 9EQ
T1 - Copper Beech - Reduce branches by approximately 2 metres focusing mainly on lateral branches rather than the top. Lift canopy to provide statutory clearance over the road and clear from service cables. T2 - Tulip Tree - Reduce by approximately 3 metres to restore balance within the crown due to previous limb failure leaving the tree unbalanced. T3 - Horse Chestnut - Reduce by approximately 3 to 4 metres, leaving a natural flowing crown outline and remove major deadwood. T4 - To fell and remove 1 x Yew tree and install eco plugs to prevent re-growth.
-
P26/S4236/TPO Granted
1 Sherwood Gardens Henley-on-thames RG9 1QJ
T1 Copper Beech. Low canopy over road and footpath. To raise canopy to statutory clearances, (5.2m over road, 2.5m over footpath). To remove deadwood greater than 60mm over road and footpath, for safety purposes, minimising any chance for larger falling deadwood in windy conditions.
-
P26/S4118/TPO Decided
Johnson Matthey Technology Centre, Blount’s Court Road, Sonning Common RG4 9NH
Carry out all recommended works as listed within the accompanying tree survey document dated 24/08/26
-
P26/S4579/TCA Decided
St Nicholas House 90 High Street Wallingford OX10 0BW
Magnolia Tree - 1.5m reduce and height and lateral spread to previous pruning points
-
P26/S4354/TPO Granted
Henley College Deanfield Avenue Henley-on-thames RG9 1UH
Ash (T2 of TPO 09/2019) - Reduce back crown over single storey block D4 by a maximum of 4m at its widest point (work mainly relates to over extended limbs over roof). Reduce back low branches over the roof to create 3m clearance. Cutback branches from front of the adjacent building (D6) to create 2-3m clearance. To help balance the crown, reduce remaining crown by approx. 2m. To avoid altering the balance of the tree as a whole, the crown of the tree should be reduced in proportion to its original shape. All pruning cuts must be made at branch junctions, leaving sufficient live growth to maintain or enhance crown form.