Planning application
Upper Market Place, Henley on Thames, RG9 2AQ
Decided. The decision notice on the council portal carries the outcome in full, including any conditions.
Proposal
T1 - Whitebeam situated outside the front of the Queen Victoria Pub T2 - Tree of Heaven situated outside the Old Time Station T1 - To Crown lift this tree up to 3m all around to give pedestrian clearance. Also to prune all around to form a compace crown. To remove all arisings. T2 - To remove all major deadwood and stumps. to remove al arisings. Remarks:
As published by the council, reference P14/S4361/TCA
Application record
- Reference
- P14/S4361/TCA
- Type
- Works to trees in CA
- Status
- Decision Made
- Decision
- No obj CA works
- Received
- 8 Aug 2014
- Validated
- 8 Aug 2014
- Decided
- 20 Aug 2014
- Postcode
- RG9 2AQ
Timeline
Dates from the published record
-
8 Aug 2014
Received by South Oxfordshire
-
20 Aug 2014
Decision issued: No obj CA works
-
11 Oct 2026
Added to PlanIndex
Documents
Plans, drawings, consultee responses and the officer's report
2 documents on file for this application
A planning file usually holds the application form, drawings and site plans, consultee responses, the officer's report and the decision notice.
Watch members (£5 a month) open the document list from here.
Open the documentsAfter the decision
South Oxfordshire has decided this application; the outcome above is the register's own wording and the decision notice on the council portal carries the detail. More in our guide to what happens after a planning decision.
About tree works applications
Applications for works to trees cover protected trees: consent under a tree preservation order, or six weeks notice for trees in a conservation area. More in our guide to planning application types.
Nearby applications
Within 0.3 miles
-
Henley-On-Thames Town Hall Market Place Henley-On-Thames RG9 2AQ
The proposals facilitate the retention of the following: i. Two high-level white spot lights. ii. Two high-level coloured uplighters iii. One row of lights along the apex.
Granted Heritage and listed buildings 9 docs -
Henley-on-Thames Town Hall, Market Place, Henley-on-Thames, RG9 2AQ
Installation of eight steel eye bolts (four for each banner) into the mortar joints of the front facade of the building to accommodate two banners, with maximum dimensions of 4m x 1.5m, either side of the front entrance.
Granted Heritage and listed buildings 14 docs -
Henley-on-Thames Town Hall, Market Place, Henley-on-Thames, RG9 2AQ
Erection of two temporary banners to the front elevation of Henley Town Hall.
Granted Advertising 14 docs -
Henley Town Hall Market Place Henley on Thames RG9 2AQ
Installation of a Ruckus T300 Access Point (AP) to eastern elevation of the Town Hall, a sector controller base station antenna (point to point) on the Town Hall roof attached to existing pole, to provide a broadband signal that will beam the WIFI signal out into Market Place Henley.
Granted Heritage and listed buildings 11 docs -
Henley-on-Thames Town Hall Market Place HENLEY-ON-THAMES RG9 2AQ
Replacement of existing acoustic panels with newer panels. Addition of extra acoustic panels. Removal of 8 x existing loudspeakers and cream coloured equipment rack from main hall. Addition of 2 new loudspeakers to end wall, and 2 x subwoofers to stage. New equipment rack to be located in cupboard rather than in main hall. Addition of 4 x Small Wall Mounted loudspeakers to Council Chamber with associated cables and control. New Microphones for this room to be wireless and table-top/removable. Removal of Large Lighting Fixture from above stage. Removal of Two Old lighting fixtures from side walls. Addition of two new Theatre style lighting bars, One above stage, One above Main Hall, with power and associated cabling. Addition of removable lighting fixtures to newly installed lighting bars.(as amended by plan and email received 1 February 2018 to omit new lighting).
Granted Heritage and listed buildings 11 docs -
Henley-on-Thames Town Hall Market Place Henley-on-Thames RG9 2AQ
Fitting of new cast iron elbows to the ends of the two rear (west) rainwater downpipes and installation of drainage channel paving to enable the controlled discharge of rainwater away from the building and into the adjacent road drainage system.
Granted Heritage and listed buildings 28 docs
Other tree works applications
In South Oxfordshire
-
P26/S4235/TCA Decided
Thorpe Farm House Thorpe Street Aston Upthorpe Didcot OX11 9EQ
T1 - Copper Beech - Reduce branches by approximately 2 metres focusing mainly on lateral branches rather than the top. Lift canopy to provide statutory clearance over the road and clear from service cables. T2 - Tulip Tree - Reduce by approximately 3 metres to restore balance within the crown due to previous limb failure leaving the tree unbalanced. T3 - Horse Chestnut - Reduce by approximately 3 to 4 metres, leaving a natural flowing crown outline and remove major deadwood. T4 - To fell and remove 1 x Yew tree and install eco plugs to prevent re-growth.
-
P26/S4236/TPO Granted
1 Sherwood Gardens Henley-on-thames RG9 1QJ
T1 Copper Beech. Low canopy over road and footpath. To raise canopy to statutory clearances, (5.2m over road, 2.5m over footpath). To remove deadwood greater than 60mm over road and footpath, for safety purposes, minimising any chance for larger falling deadwood in windy conditions.
-
P26/S4118/TPO Decided
Johnson Matthey Technology Centre, Blount’s Court Road, Sonning Common RG4 9NH
Carry out all recommended works as listed within the accompanying tree survey document dated 24/08/26
-
P26/S4579/TCA Decided
St Nicholas House 90 High Street Wallingford OX10 0BW
Magnolia Tree - 1.5m reduce and height and lateral spread to previous pruning points
-
P26/S4354/TPO Granted
Henley College Deanfield Avenue Henley-on-thames RG9 1UH
Ash (T2 of TPO 09/2019) - Reduce back crown over single storey block D4 by a maximum of 4m at its widest point (work mainly relates to over extended limbs over roof). Reduce back low branches over the roof to create 3m clearance. Cutback branches from front of the adjacent building (D6) to create 2-3m clearance. To help balance the crown, reduce remaining crown by approx. 2m. To avoid altering the balance of the tree as a whole, the crown of the tree should be reduced in proportion to its original shape. All pruning cuts must be made at branch junctions, leaving sufficient live growth to maintain or enhance crown form.