Skip to content
PlanIndex Get alerts
Menu

Planning application

11 Hill Road, Watlington, Oxon, OX49 5AB

Decided South Oxfordshire P14/S4187/TCA Works to trees in CA

Works: Trees

Decided. The decision notice on the council portal carries the outcome in full, including any conditions.

Proposal

T1 - Holm Oak Holm Oak (T1) carry out a 15-20% crown reduction incorporating a 10% crown thin. This will be focused on the south and western side of the crown. This is being done to rebalance the crown as well as reducing weight of overextended lateral branch growing over entrance gates. Remarks:

As published by the council, reference P14/S4187/TCA

Application record

Reference
P14/S4187/TCA
Type
Works to trees in CA
Status
Decision Made
Decision
No obj CA works
Received
7 Mar 2014
Validated
7 Mar 2014
Decided
21 Mar 2014
Postcode
OX49 5AB

Timeline

Dates from the published record

  1. 7 Mar 2014

    Received by South Oxfordshire

  2. 21 Mar 2014

    Decision issued: No obj CA works

  3. 11 Oct 2026

    Added to PlanIndex

Documents

Plans, drawings, consultee responses and the officer's report

2 documents on file for this application

A planning file usually holds the application form, drawings and site plans, consultee responses, the officer's report and the decision notice.

Watch members (£5 a month) open the document list from here.

Open the documents

After the decision

South Oxfordshire has decided this application; the outcome above is the register's own wording and the decision notice on the council portal carries the detail. More in our guide to what happens after a planning decision.

About tree works applications

Applications for works to trees cover protected trees: consent under a tree preservation order, or six weeks notice for trees in a conservation area. More in our guide to planning application types.

Nearby applications

Within 0.3 miles

  • 1 Chiltern Gate Hill Road Watlington OX49 5AB

    P19/S4029/LB Submitted 5 Nov 2019 50 yards away

    Replacement of existing exterior front door with new wood door and frame.(additional information received 23 January 2020).

    Granted Heritage and listed buildings 8 docs
  • 1 Chiltern Gate Hill Road WATLINGTON Oxon OX49 5AB

    P17/S3075/LB Submitted 21 Aug 2017 50 yards away

    Replacement of existing cast iron rainwater goods with Brett Martin 'cascade' cast iron style rainwater good or similar approved.

    Granted Heritage and listed buildings 7 docs
  • 3 Chiltern Gate, Hill Road, Watlington, OX49 5AB

    P21/S2281/HH Submitted 17 May 2021 50 yards away

    1) Removal of existing shed (12ft x 8 ft) comprising one timber side, front and roof with the back and other side adjoining brick wall. The joints with the walls are with nails into mortar, and roof felt is simply lipped under a slight brick overhang. Minimal damage would be caused by its removal and any holes in the lime mortar will be filled with like lime mortar. 2) Installation of a new 12ft x 8ft timber shed within standard permitted development rules along the back fence line of the garden.

    Granted Householder 9 docs
    Small domestic
  • 14 Shirburn Street WATLINGTON Oxon OX49 5BT

    P15/S3762/LB Submitted 9 Nov 2015 50 yards away

    Installation of 6 no. solar panels to rear of church over pre school

    Granted Heritage and listed buildings 10 docs
  • 54 Couching Street WATLINGTON OX49 5PU

    P17/S4148/LB Submitted 22 Nov 2017 50 yards away

    Extension, internal alterations and change of use of part of ground floor from A1 to residential. (As per amended plans received 12 January 2018)(As per addition site plan received 16 January 2018)

    Granted Heritage and listed buildings Extension 14 docs
  • 54 Couching Street WATLINGTON OX49 5PU

    P17/S4147/FUL Submitted 22 Nov 2017 50 yards away

    Extension, internal alterations and change of use of part of ground floor from A1 to residential. (As per amended plans received 12 January 2018) (As per addition site plan received 16 January 2018)

    Granted Full applications Extension 15 docs

In South Oxfordshire

  • P26/S4235/TCA Decided

    Thorpe Farm House Thorpe Street Aston Upthorpe Didcot OX11 9EQ

    T1 - Copper Beech - Reduce branches by approximately 2 metres focusing mainly on lateral branches rather than the top. Lift canopy to provide statutory clearance over the road and clear from service cables. T2 - Tulip Tree - Reduce by approximately 3 metres to restore balance within the crown due to previous limb failure leaving the tree unbalanced. T3 - Horse Chestnut - Reduce by approximately 3 to 4 metres, leaving a natural flowing crown outline and remove major deadwood. T4 - To fell and remove 1 x Yew tree and install eco plugs to prevent re-growth.

    Received 21 Sep, published by the council 2 Oct 2026 Trees
  • P26/S4236/TPO Granted

    1 Sherwood Gardens Henley-on-thames RG9 1QJ

    T1 Copper Beech. Low canopy over road and footpath. To raise canopy to statutory clearances, (5.2m over road, 2.5m over footpath). To remove deadwood greater than 60mm over road and footpath, for safety purposes, minimising any chance for larger falling deadwood in windy conditions.

    Received 21 Sep, published by the council 2 Oct 2026 Trees
  • P26/S4118/TPO Decided

    Johnson Matthey Technology Centre, Blount’s Court Road, Sonning Common RG4 9NH

    Carry out all recommended works as listed within the accompanying tree survey document dated 24/08/26

    Received 14 Sep, published by the council 26 Sep 2026 Trees
  • P26/S4579/TCA Decided

    St Nicholas House 90 High Street Wallingford OX10 0BW

    Magnolia Tree - 1.5m reduce and height and lateral spread to previous pruning points

    Received 7 Oct, published by the council 11 Oct 2026 Trees
  • P26/S4354/TPO Granted

    Henley College Deanfield Avenue Henley-on-thames RG9 1UH

    Ash (T2 of TPO 09/2019) - Reduce back crown over single storey block D4 by a maximum of 4m at its widest point (work mainly relates to over extended limbs over roof). Reduce back low branches over the roof to create 3m clearance. Cutback branches from front of the adjacent building (D6) to create 2-3m clearance. To help balance the crown, reduce remaining crown by approx. 2m. To avoid altering the balance of the tree as a whole, the crown of the tree should be reduced in proportion to its original shape. All pruning cuts must be made at branch junctions, leaving sufficient live growth to maintain or enhance crown form.

    Received 28 Sep, published by the council 11 Oct 2026 Trees