3 , Lake View , Furness Vale , Derbyshire , SK23 7QD

1. 8 Apr 2021

   Received by High Peak

2. 22 Jun 2021

   Decision issued: Permitted

3. 9 Sep 2026

   Added to PlanIndex

High Peak granted permission on 22 June 2021, subject to any conditions on the decision notice. Work must normally begin within three years or the permission lapses. More in our guide to what happens after a planning decision.

Householder applications cover work to an existing house and its garden, such as extensions, lofts and outbuildings, and cannot create a separate dwelling or change what the building is used for. More in our guide to planning application types.

• Furness Vale Business Centre , Calico Lane , Furness Vale , Derbyshire , SK23 7SW

  HPK/2024/0161 Submitted 17 Apr 2024 174m away

  Use of decommissioned double decker bus as a café with the change of use of the disused grass area and gardens to be used as café premises for customer seating and car parking.

  Granted Full applications 43 docs

• Furness Vale Marina , Station Road , Furness Vale , Derbyshire , SK23 7QA

  HPK/2026/0250 Submitted 23 Jun 2026 209m away

  100% historically approved · decision due ~18 Aug

  Certificate of Lawfulness for a proposed use - unrestricted use of marina moorings for residential use

  Awaiting decision Lawful development 3 docs

• 150-154 Soldier Dick , Buxton Road , Furness Vale , Derbyshire , SK23 7PH

  HPK/2025/0174 Submitted 25 Apr 2025 226m away

  100% historically approved · decision due ~14 Jul

  Application for the variation of condition 2 in relation to HPK/2022/0170 for a removal of the proposed rear extension and maintaining the existing small single storey extension with a larger window, and proposal of Juliet balconies to the rear

  Awaiting decision Full applications Extension Windows or glazing 16 docs
  Small domestic

• GREEN ACRES , Gow Hole , Furness Vale , Derbyshire , SK23 7QE

  HPK/2024/0305 Submitted 15 Jul 2024 374m away

  Proposed extension and alterations

  Granted Householder Extension 12 docs
  Domestic

• Ivy Cottage , Gow Hole , Furness Vale , Derbyshire , SK23 7QE

  HPK/2021/0426 Submitted 19 Jul 2021 374m away

  Change of use of stables to ancillary living accommodation for clients parents

  Granted Full applications 10 docs

• St Johns Church , Buxton Road , Furness Vale , Derbyshire , SK23 7PX

  HPK/2026/0302 Submitted 28 Jul 2026 388m away

  To change of use from previous church to single dwelling

  Withdrawn Full applications
  Domestic

• HPK/2026/0249 Granted

  20 , Dorset Close , Harpur Hill , Buxton , Derbyshire , SK17 9PJ

  Erection of single storey rear extension - remove porch, install sliding patio doors

  19 Jun 2026 Householder
• HNT/2026/0008 Granted

  Wynstay , Ridge Lane , Combs , Derbyshire , SK23 9UU

  Application for prior approval of a proposed: Enlargement of a dwellinghouse by construction of additional storey to the principal part of the existing dwelling by removing the existing roof structure and erecting a new roof structure 2.669m higher than the existing. Current height of dwellinghouse 4.77m, height after additional storey added 7.44m

  24 Jul 2026 Householder
• HNT/2026/0007 Granted

  94 , Macclesfield Road , Whaley Bridge , Derbyshire , SK23 7DH

  Application to determine if prior approval is required for a proposed single storey extension with flat roof and rooflight.

  21 Jul 2026 Householder
• HPK/2026/0196 Granted

  27 , Marlborough Road , Buxton , Derbyshire , SK17 6RD

  Erection of a detached single garage (replacing an existing timber summer house). Widening of the existing gate posts for vehicular access, the reinstatement of lower ground floor windows and 2no. stained glass windows to the front elevation at ground level. Timber trellis proposed above the existing stone boundary wall to the rear

  8 May 2026 Householder
• HPK/2026/0240 Granted

  9 , Warhurst Fold , Hadfield , Glossop , Derbyshire , SK13 1AX

  Single storey extensions to front and rear of property, and conversion of Workshop to habitable accommodation

  18 Jun 2026 Householder