Planning application
26/1043/LBC
9 Lower Shapter Street Topsham EX3 0AT
Proposal
Addition of sloping zinc canopy to front porch
As published by the council, reference 26/1043/LBC
Timeline
Dates from the published record
-
13 Jul 2026
Received by Exeter
-
22 Jul 2026
Validated
Checked as complete and ready for consideration.
-
26 Jul 2026
Added to PlanIndex
-
Decision
Awaiting decision
The statutory target is eight weeks for most applications and thirteen for major development. Extensions of time are common.
What happens while it is decided
The process from here
This application is with Exeter for determination. The council publicises it, consults neighbours and technical bodies where required, and weighs the responses against local and national planning policy.
The statutory target is eight weeks for most applications and thirteen for major development, though extensions of time are common. Comments carry most weight while the case is undecided, so check the council portal for the deadline if you want to respond.
About heritage and listed buildings applications
How this application type works
Heritage applications concern listed buildings and conservation areas. Listed building consent is needed for works, inside or out, that affect the special interest of a listed building, and carrying out such works without consent is a criminal offence. The council weighs harm to the heritage asset against any public benefit of the proposal.
More on heritage and listed buildings applications in our guide
Nearby applications
Within 500 metres
-
25/1184/CAT Granted
9 Lower Shapter Street Topsham EX3 0AT
T1 Silver Birch. cut back new growth to previous cuts made in 2022 . Cuts up to 30mm T2 Bay cut back new growth to previous cuts made in 2022. Cuts to 30mm
-
26/0322/FUL Refused
5 Lower Shapter Street Topsham EX3 0AT
Removal of the existing modern brick boundary wall and creation of one off-street parking space. Installation of an electric vehicle charging point with brick-built planter to the western boundary. Reduction in ground level.
-
26/0323/LBC Refused
5 Lower Shapter Street Topsham EX3 0AT
Removal of the existing modern brick boundary wall and creation of one off-street parking space. Installation of an electric vehicle charging point with brick-built planter to the western boundary. Reduction in ground level.
-
26/0628/DIS Decided
25 The Strand Topsham EX3 0AX
LIME RENDER SPECIFICATION Undertake rendering to all external walls of the building as shown on elevation drawings, with a lime render system as specification provided by Cornish lime comprising:- - Harling coat. - Dubbing out. - 1st lime render scratch coat with flock fibres & fibre glass bedded in. - 2nd lime render scratch coat with flock fibres. - Lime render float coat. - Roughcast final coat to match existing finish. To areas of existing cob walling supply and install dry fix stucco helifix pins or helifix patch pins driven into the cob with a helical bar driver into pre drilled holes and a downward angle Specification details: Dub out any deep holes in the wall with a Haired Lime Mortar. Rebuild defects with bricks, stone or cob blocks as appropriate. Treat wooden lintels with preservative and counter batten with lath if rendering over them. Apply a 3 mm hand harled coat of Secil Consolidation Mortar to provide a key to the wall. Leave to dry for a minimum of 24 hours. 15 mm scratch coat of Haired Lime Mortar with added pozzolan (Argical) to smooth the contours of the wall. (7 parts mortar to 1 part pozzolan). The hair reduces any slumping whilst applying and shrinkage cracking whilst curing. Key with a scratch comb. Leave to dry for approximately 5-7 days. 10 mm float coat of Unhaired Lime Mortar with added pozzolan (Argical). (7 parts mortar to 1 part pozzolan). Finish to be rough cast, apply an additional coat of hand harled lime mortar or Secil Consolidation Mortar. CONTROL AND PROTECTION Control suction by lightly spraying the surface with water half and hour before applying each coat. In warm weather it may be necessary to spray with water afterwards. Protect each render coat during the curing process from the elements such as hot drying wind, strong sun, rain and don't apply in temperatures below 5 degrees centigrade when there?s a risk of frost. Cover with hessian sheet and should leave in place as long as necessary. CURING Allow fo
-
25/1588/FUL Granted
27 The Strand Topsham EX3 0AX
Part conversion of garage to a home gym including replacement roof and new doors
-
25/1589/LBC Granted
27 The Strand Topsham EX3 0AX
Part conversion of the garage to a home gym including replacement roof and new doors
Other heritage and listed buildings applications
In Exeter
-
26/0520/LBC Withdrawn
The Flat 58 Fore Street Topsham EX3 0HW
The renovation, repair and single glazing of a historic window opening on the north elevation at the second level.
-
26/0211/LBC Granted
Haldon Court 4 Manston Terrace Exeter EX2 4NP
Repair and restoration of the existing sash window boxes and replacement of the current replacement sashes and replacement casement windows.
-
26/1082/LBC Awaiting decision
8 The Strand Topsham EX3 0JB
Internal alterations to convert garage to habitable accommodation on ground floor. Minor alterations to internal layout on first floor
-
26/1077/LBC Awaiting decision
8 Queens Terrace Exeter EX4 4HR
Proposed refurbishment, repair and restoration work including internal alterations, repair and restoration of historic fabric, replacement of windows where required, roof replacement and strengthening and associated works.
-
26/1074/LBC Awaiting decision
8 Monmouth Street Topsham EX3 0AJ
Alterations to single storey rear extension