Planning application
24/1230/TPO
The Malthouse 7 Haven Road Exeter EX2 8BP
Proposal
T6 Alder crown lift to 4.5 meters.
As published by the council, reference 24/1230/TPO
Timeline
Dates from the published record
-
18 Oct 2024
Received by Exeter
-
29 Oct 2024
Decision issued: Refuse Planning Permission
-
1 Aug 2026
Added to PlanIndex
What refusal means
The process from here
The council refused this application for the reasons set out on the decision notice, which the council portal holds in full. Only the applicant can appeal a refusal; the time limit runs from the decision date and is shorter for householder schemes.
Refusal does not prevent a fresh attempt. Applicants often address the reasons for refusal and resubmit, so a refused scheme is not necessarily the end of proposals for the site.
About trees applications
How this application type works
Tree applications cover work to protected trees: those under a tree preservation order need consent for pruning or felling, and trees in a conservation area need six weeks written notice before work starts. The council assesses the amenity value of the tree and can refuse consent, approve it with conditions, or in conservation areas make a preservation order in response.
Nearby applications
Within 500 metres
-
26/0111/LBC Granted
1 Sydney Place Alphington Street Exeter EX2 8AR
Removal of the front chimney to roof level and rebuilding of the chimney, addition of chimney caps and re-installation of lead flashing. Removal of the top 3-5 courses of the rear chimney, re-bedding with new lead flashings and addition of permanent caps to the top. Installation of air bricks to both chimneys. Removal of render and repointing of parapet with rebedding of unstable coping stones and re-rendering.
-
26/0410/ADV Granted
Unit 1 Haven Banks Water Lane Exeter EX2 8BY
Installation of 1 illuminated fascia sign 5.0 m long x 2.0 m high, 1 window vinyl 1.7 m high x 6.7 m wide on front northwest elevation and 3 window vinyl approximately 1.7 m high x 5.7 m wide on the southwest side elevation and 1x non-illuminated totem sign measuring 4.0 m high x 2.0 m wide fronting water lane.
-
26/1084/FUL Awaiting decision
80 Waterside Exeter EX2 8GY
Replacement of all external windows and doors
-
25/1538/ADV Granted
Unit 3-4 Haven Banks Water Lane Exeter EX2 8BY
Installation of 4x aluminium panel, internally illuminated signs on front north west elevation measuring 1.5m high x 5.6 m wide, 1.5 m high x 5.7 m wide, 1.5 high x 5.76 wide, 2.98 high x 5.7 m wide, projecting 100mm from the facade.
-
25/1020/LPD Decided
Haven Banks Water Lane Exeter EX2 8BY
Application for a Certificate of Lawfulness for a Proposed Use or Development (CLOPUD) comprising the use of the Unit 1 as a Padel Tennis facility and Unit 2 as an extension to the neighbouring Tenpin Bowling Alley (Use Class E(d)).
-
25/1419/VOC Granted
Unit 3-4 Haven Banks Water Lane Exeter EX2 8BY
Variation of condition 3 (Hours of Use) of planning permission 89/0383/03 (Alterations to proposed ten pin bowling centre granted on 16 May 1989) to extend opening hours to 08:00-00:30 Sunday to Thursday and 08:00-01:30 on Fridays, Saturdays and Bank Holidays.
Other trees applications
In Exeter
-
26/1122/CAT Awaiting decision
Collingwood Mews Bicton Place Exeter EX1 2PG
T1 - Lawson cypress, abutting and pressing on the side boundary wall: Fell
-
26/1112/CAT Awaiting decision
Homedale Health 34 Denmark Road Exeter EX1 1SE
T1 Yew reduce canopy by approximately 1m and reduce disproportionately overgrown westerly limb by approximately 2m in order to re balance tree. T2 Pittosporum reduce by approximately 1m for maintenance.
-
26/1116/CAT Awaiting decision
10 Magdalen Road Exeter EX2 4SY
T1 - Eucalyptus - Reduce away from property (no. 10 Magdalen Road) allowing a clearance of approximately 1.5m - 2m. Reduce away from neighbouring property (no. 12 Magdalen Road ) allowing a clearance of approximately 1.5 - 2m. Reduce lower branch towards road on Northwest aspect by 1.5 -2m. Crown raise lowest limb in neighbouring property by approx 1m -1.5m. Reason for works: The proposed works are intended to provide appropriate clearance from the neighbouring properties (Nos. 10 and 12) and the adjacent road, reducing the likelihood of branches coming into contact with the buildings during periods of high winds or continued growth. The crown reduction and selective crown raising will also allow increased natural light to reach the neighbouring properties while retaining the tree?s overall form, health and amenity value. The works represent a balanced approach to ongoing tree management and will help minimise the potential for future damage to nearby structures.
-
26/1113/CAT Awaiting decision
40 Alphington Road Exeter EX2 8HS
T001 Elder - A full crown reduction of approximately 1.0-1.5 metres to reduce overall crown dimensions while maintaining a balanced and natural form. T002 Acer - Reduce and reshape the Acer crown by up to 0.5-1.0m on selected branch extremities to maintain a balanced natural form, undertake a light crown thin (approximately 10-15%) to remove congested and crossing branches, and carry out a minor crown lift where required to provide clearance beneath the canopy
-
26/0574/TPO Granted
Block H Birks Halls New North Road Exeter EX4 4GE
The yew tree in question is showing signs of asymmetric crown formation. After previous limb failure causing a structural imbalance to the remaining crown. My proposal for the future vigour of this tree is to Install a dynamic cobra bracing system to support the imbalance of the lower structural limbs forming a strong three way triangulation of support for the lateral growth that has become very prone to wind through. Please see photo (Yew Reduction Points) for bracing points highlighted in blue. Selective thinning of the whole crown by removing internal growth with a maximum cut size of 60mm diameter 1.5m length by removing multiple smaller limbs I believe this will be more beneficial to the trees structure, and limit the amount of large wounds left by the thinning works. Allowing for better wind distribution through the remaining crown hopefully eliminating future wind through. by leaving the larger structural limbs intact for the future longevity of the structural integrity. please see photo (Yew Reduction Points) with cut points highlighted in red for chosen thinning points throughout the crown Remove failed limb back to the branch collar. The failed limb supported by lower crown hazard beam fracturing of the timber 150mm diameter 2.5m length this will be the largest of the limbs to be removed through suggested works. red dotted line on attached photo hard to see the hazard beam on the photo (Yew Reduction Points) Selective reduction of the height maximum of 1m in length 40mm cut size to the crown on selected limbs again highlighted in red so that again the risk of wind through will be reduced.