Planning application
Anvil Cottage Hammer Vale, Liphook, Hampshire, GU27 1QJ
Works: Trees
Decided. The decision notice on the council portal carries the outcome in full, including any conditions.
Proposal
Holly tree behind studio building - reduce height by 50% - completely remove the outer trunk/bough that leans towards track Holly tree by car port - reduce by 50%
As published by the council, reference EHDC-25-0915-TCA
Application record
- Reference
- EHDC-25-0915-TCA
- Type
- Trees in a conservation area applications
- Decision
- 31-08-2025
- Received
- 4 Aug 2025
- Ward
- Bramshott & Liphook
- Parish
- Bramshott and Liphook CP
- Postcode
- GU27 1QJ
Site history
Applications at this address on the East Hampshire register
This site has had 2 applications since 2025.
-
EHDC-25-0915-TPO Decided
Anvil Cottage Hammer Vale, Liphook, Hampshire, GU27 1QJ
Holly tree behind studio building - reduce height by 50% - completely remove the outer trunk/bough that leans towards track Holly tree by car port - reduce by 50%
Timeline
Dates from the published record
-
4 Aug 2025
Received by East Hampshire
-
25 Jul 2026
Added to PlanIndex
After the decision
East Hampshire has decided this application; the outcome above is the register's own wording and the decision notice on the council portal carries the detail. More in our guide to what happens after a planning decision.
About tree works applications
Applications for works to trees cover protected trees: consent under a tree preservation order, or six weeks notice for trees in a conservation area. More in our guide to planning application types.
Nearby applications
Within 500 metres
-
Anvil Cottage Hammer Vale, Liphook, Hampshire, GU27 1QJ
Holly tree behind studio building - reduce height by 50% - completely remove the outer trunk/bough that leans towards track Holly tree by car port - reduce by 50%
Decided Trees
Other tree works applications
In East Hampshire
-
EHDC-26-0563-TCA Decided
ROGERS COURT Draymans Way, Alton, Hampshire, GU34 1TS
T1 - Yew - Located to side of No 5 - Encroaching onto property - Would like to reduce lateral branches to clear property removing up to 1m
-
EHDC-26-0552-TPO Decided
1 Knowles Close, Bordon, Hampshire, GU35 0YX
T4 - Oak - fell - approximately 4-5m high and is imbalanced, branches overhanging neighbouring properties. Grind stump. T5 - Oak - fell - 3-4m in height, also imbalanced. Grind stump.
-
EHDC-26-0545-TPO Decided
TREBANK, 76 Mill Chase Road, Bordon, Hampshire, GU35 0HG
T1 and T2 I would like to: 1. Lift the crown to 12m 2. Create a clearance between the crown and the house of 6m 3. Thin the dead wood from the crown to 45%
-
EHDC-26-0547-TPO Decided
St Johns School Whichers Gate Road, Rowlands Castle, Rowlands Castle, PO9 6FB
Oak (T1) - Reduce Crown all over by 4m to natural target pruning points, this will leave a height of 25m and crown spread of 30m. Crown thin 30%.
-
EHDC-26-0537-TPO Decided
19 Blue Timbers Close, Bordon, Hampshire, GU35 0XL
Silver Birch trees x 2 - Reduce the overall canopy of both trees by approximately 30%. This will involve cutting back longer branches and growth evenly all over the crown to reduce height and spread, whilst keeping the natural shape and structure of the trees fully intact.