Planning application
P/NMA/2025/06654
4 Harrison Way West Moors BH22 0NL
Proposal
Non Material Amendment to Remove existing personnel door and reposition personnel door on North Elevation to planning permisison P/HOU/2025/04653:Erect extension to existing garage (including dormers to both North & South side elevations.)
As published by the council, reference P/NMA/2025/06654
Timeline
Dates from the published record
-
7 Nov 2025
Received by Dorset
-
26 Nov 2025
Decision issued: Granted
-
26 Jul 2026
Added to PlanIndex
What a grant of permission means
The process from here
Permission has been granted, usually subject to conditions listed on the decision notice, some of which must be discharged before work starts. The decision notice on the council portal sets out exactly what was approved.
Work must normally begin within three years of the decision or the permission lapses. Neighbours cannot appeal a grant; challenging one means judicial review of how the decision was made, within tight time limits.
About amendments applications
How this application type works
An amendment application changes a permission that already exists. Non-material amendments cover small adjustments with no wider effect, while minor material amendments, usually made by varying a condition, allow modest design changes without a fresh application. Anything beyond that needs a new permission, so the scope here is deliberately narrow.
Nearby applications
Within 500 metres
-
P/CLP/2026/03530 Awaiting decision
43 Moorlands Road West Moors BH22 0JN
Single storey rear extension
-
P/HOU/2026/03370 Awaiting decision
57 Moorlands Road West Moors BH22 0JN
Erect rear extension, raise roof to create habitable accommodation at first floor level with dormers on each side and form gable ends to front and rear elevations and internal alterations.
-
P/TRT/2025/05741 Split decision
26 Moorlands Road West Moors BH22 0JW
T1 Tulip Tree - Remove 3 lowest branches. T2 Thuja - Crown raise canopy to match proposed level of T1 crown. Pruning secondary and tertiary branches only. Reduce height of T2 to match height of T1. (As annotated in photographs)
-
P/HOU/2026/02739 Granted
29 Sarum Avenue West Moors Ferndown BH22 0ND
Erect extension to side elevation
-
P/HOU/2025/05533 Granted
20 Moorlands Road West Moors BH22 0JW
Single storey rear and side extension
-
P/CLP/2025/05216 Granted
237 Station Road West Moors Ferndown BH22 0HZ
Single storey rear extension & Conversion of the existing garage & infilling the existing covered area to side of property.
Other amendments applications
In Dorset
-
P/NMA/2026/03502 Refused
Former Perryfield Works Complex Pennsylvania Road Portland DT5 1FJ
Non-material amendment to Approved P/A P/18/00883/FUL (Erect four dwellings) to re-position the existing garages and parking bays
-
P/VOC/2026/04014 Awaiting decision
2 Bonvils Road Worth Matravers BH19 3LR
Erect ground floor extensions and replacement of existing shed to create garden room (with variation of Condition 2 of permission P/HOU/2026/00371 to reduce the scale of the proposal)
-
P/NMA/2026/03363 Granted
Allendale House Hanham Road Wimborne Minster BH21 1AS
Non material amendment to planning permission P/FUL/2025/01489 to revise proposed bollards to the same with LED capping for increased visibility and reinstatement of extra section of walling.
-
P/VOC/2026/02989 Granted
22 Kingston Close Blandford Forum DT11 7UQ
Erect first floor rear extension (With Variation of condition 2 of planning permission P/HOU/2025/01109 to amend approved plans).
-
P/VOC/2026/04024 Awaiting decision
Bulbury Golf Course Bulbury Lane Lytchett Minster BH16 6HR
Erect driving range building and netting( with variation to conditions 2,4 & 6 of planning permission P/FUL/2022/04851 to revise the design for the driving range facility that substantially reduces the overall footprint and massing of the facility. The amendment seeks to reduce the scale of the built structure to eight covered bays, with ball containment instead achieved through a fully netted enclosure surrounding the hitting area, incorporating synthetic turf and net support structures at each corner, and an ancillary ball dispensing unit and a robot holding area with associated hopper.