8 Buckingham Drive Winsford Cheshire CW7 1FA

1. 7 Nov 2019

   Received by Cheshire West and Chester

2. 18 Dec 2019

   Decision issued: Approval

3. 23 Aug 2026

   Added to PlanIndex

Permission has been granted, usually subject to conditions listed on the decision notice, some of which must be discharged before work starts. The decision notice on the council portal sets out exactly what was approved.

Work must normally begin within three years of the decision or the permission lapses. Neighbours cannot appeal a grant; challenging one means judicial review of how the decision was made, within tight time limits.

Tree applications cover work to protected trees: those under a tree preservation order need consent for pruning or felling, and trees in a conservation area need six weeks written notice before work starts. The council assesses the amenity value of the tree and can refuse consent, approve it with conditions, or in conservation areas make a preservation order in response.

More on trees applications in our guide

• 2 Buckingham Drive Winsford Cheshire CW7 1FA

  19/04341/TPO Submitted 3 Dec 2019 41m away

  Four lime trees (T3, T4, T5 and T6) - pollard to match the lime trees at 4 and 6 Buckingham Drive, this is to allow more light into the garden of number 2

  Granted Trees 3 docs

• 1 Regency Court Winsford Cheshire CW7 1FE

  19/02553/TPO Submitted 8 Jul 2019 46m away

  T1 and T2 Lime trees reduce by 25% crown lift to 6m, to gain more light in the bottom Flats.

  Granted Trees 3 docs

• 1 Regency Court Winsford Cheshire CW7 1FE

  20/04259/TPO Submitted 13 Nov 2020 74m away

  G1 Sycamores x3 - reduce back from building by 5m. T1 Cherry - fell to a low stump. G2 Sorbus Hornbeam Cotoneaster - reduce by 20%. G3 Apple x2 - reduce by 20%.

  Granted Trees 4 docs

• Lime Trees 2A The Loont Winsford CW7 1EU

  25/02897/TPO Submitted 15 Sep 2025 114m away

  96% historically approved · decision due ~10 Nov

  T1- lime tree - re pollard back to the original pollard points to maintain the pollard and stop the growth from the pollard points becoming week in the future as although not in direct reach of property at the moment will be in the future. G1- group of 3 trees located at 2 the loont - we would like to re pollard these trees back to the original pollard points to maintain the pollards and stop the growth from the pollard points becoming week in the future as although not in direct reach of property at the moment will be in the future. This work wants to be carried out as the regrowth on lime pollards has a tendency to be structurally not strong and if left to over extend become failing points, also the trees are over powering in the garden blocking light etc.

  Decided Trees

• S/O 2 The Loont Winsford CW7 1EU

  20/03859/DSM Submitted 12 Oct 2020 114m away

  BT intends to install fixed line broadband electronic communications apparatus - 1 x POLE (Your Ref WCHF991P WP2)

  Decided 2 docs

• 2 The Loont Winsford Cheshire CW7 1EU

  19/01773/TPO Submitted 7 May 2019 129m away

  T1 Yew - Reduce canopy from over garage roof and re-shape canopy, aprox 1 meter reduction to stop the tree from becoming too large for it's situation.

  Granted Trees 3 docs

• 26/02846/TPO Awaiting decision

  31 Covert Rise Tattenhall Chester Cheshire West And Chester CH3 9HA

  T1- X1 Oak Tree. To carry out a crown reduction on the entire tree canopy of between 2-3 metres. The tree is in clear decline, sparse canopy, lacking vitality, lots of deadwood and branch dieback. The root system on around 40% of the tree looks to have been covered with historic amounts of soil when the property was constructed.

  8 Sep 2026 Trees
• 26/02823/TPO Awaiting decision

  Churton Lodge Chester Road Churton by Aldford Chester CH3 6LA

  One pine at the entrance to Churton Lodge shown circled in red in the photo. This is a very overmature tree with three huge bottom limbs. Their used to be another pine behind this one which blew down as a result it lack and limbs on this side to help balance the tree. My fear is these limbs will either rip off due to their size and result in the loss of tree or cause it to fall down like its sister tree. I would like to just remove these three limbs to try and prevent this.

  7 Sep 2026 Trees
• 26/02819/TPO Awaiting decision

  2 Hadrian Way Cuddington Northwich Cheshire West And Chester CW8 2JR

  After consultation with a qualified arborist (Alex Davies from AJD Tree Care, Sandbach) regarding several trees on our property, he recommended the following actions (please refer to sketch map for the location of the affected trees T1, T2, T3 and T4) T1 Copper Beech TPO V/81/00175/ORD Tree No 9 Crown Lift to raise the lower small branches which overhang the pavement and are currently at head height in places T2 and T3 Sycamore Conservation Area owned by Church Crown Lift to remove the lower branches which overhang the garden of 2 Hadrian Way and are currently at head height in places T4 Sycamore Conservation Area joint owned by Church and 2 Hadrian Way Crown Lift to remove lower branches which overhang the garden of 2 Hadrian Way and are currently scraping the garage roof. The wind causes the branch to bang the roof which we believe will increase the likelihood of structural damage in bad weather. We have only been in this property for about 6 months but we recall that the previous owners suffered damage to the garage roof from a falling branch some years ago - presumably the same tree. We have spoken to the Church Warden (Ali Fletcher) about the proposed work, and on behalf of the church, she is happy for the work to proceed from her perspective.

  7 Sep 2026 Trees
• 26/02810/TPO Awaiting decision

  Land Adjacent To 9 Beasley Close Great Sutton Ellesmere Port Cheshire West and Chester CH66 2SX

  T2 Yew - Partial crown reduction by up to 2m to clear light column and reinstate light spray to road. T3 Lime - Partial crown reduction by up to 2m to clear light column and reinstate light spray to road.

  4 Sep 2026 Trees
• 26/02816/TPO Awaiting decision

  Wades Clough Meadow Close Winsford CW7 2UE

  Ash - Dismantle to a 2 metre monolith Oak no. 1 - Reduce radial branches by 4 metres to lessen mechanical load, reduce height to a maximum of 2 metres to balance. Oak no. 2 - Dismantle to 6 metre monolith

  4 Sep 2026 Trees