Planning application
14 Newall Close Tattenhall Chester Cheshire CH3 9PP
Works: Trees
Permission granted. Work must normally begin within three years of the decision or the permission lapses.
Proposal
1 x Oak (rear): Crown lift branches overhanging property and garden to suitable pruning points to achieve a 5-6m clearance above ground level to increase light levels in garden and property. Increase distance from roof of property.
As published by the council, reference 19/01858/TPO
Application record
- Reference
- 19/01858/TPO
- Type
- Application to fell/lop TPO trees
- Status
- Approved
- Decision
- Approval
- Received
- 14 May 2019
- Validated
- 14 May 2019
- Decided
- 25 Jun 2019
- Ward
- Tattenhall
- Parish
- Tattenhall
- Decision by
- Delegated Decision
- Postcode
- CH3 9PP
Timeline
Dates from the published record
-
14 May 2019
Received by Cheshire West and Chester
-
25 Jun 2019
Decision issued: Approval
-
6 Sep 2026
Added to PlanIndex
Documents
Plans, drawings, consultee responses and the officer's report
9 documents on file for this application
A planning file usually holds the application form, drawings and site plans, consultee responses, the officer's report and the decision notice.
Trade members open them from here.
Open the documentsWhat this grant of permission means
Cheshire West and Chester granted permission on 25 June 2019, subject to any conditions on the decision notice. Work must normally begin within three years or the permission lapses. More in our guide to what happens after a planning decision.
About tree works applications
Applications for works to trees cover protected trees: consent under a tree preservation order, or six weeks notice for trees in a conservation area. More in our guide to planning application types.
Nearby applications
Within 500 metres
-
11 Spinney End Tattenhall Chester CH3 9HD
92% historically approved · decision due ~20 Mar
Erection of single storey hobby/garden room building to rear garden - variation of condition 3 (materials) of planning application 25/03441/FUL
DecidedSmall domestic -
11 Spinney End Tattenhall Chester CH3 9HD
92% historically approved · decision due ~26 Dec
Erection of single storey hobby/garden room building to rear garden.
Decided Full applicationsSmall domestic -
9 Newall Close Tattenhall Chester Cheshire CH3 9PP
Erection of 2 metre high brick wall
Granted Full applications 10 docs -
9 Newall Close Tattenhall Chester Cheshire CH3 9PP
Replacement fence panels to the rear garden
Granted Full applications 10 docsSmall domestic -
Hall Bank House High Street Tattenhall Chester Cheshire CH3 9PX
New external window and door openings and replacement window, doors and rooflights to existing dwelling. Conversion of existing detached garage into insulated Workshop/ Studio and new garden boundary wall
Granted Full applications Loft or dormer Windows or glazing 23 docsSmall domestic -
2 Belgrave Cottages High Street Tattenhall Chester CH3 9QA
92% historically approved · decision due ~15 Jun
Laurel (T1) - Cut down to height of hedge (approx 4.2m). Trunk to remain. Invasion of light and possible root damage to house in future. Second tree (T2), unknown species - Reduce to size to height of hedge (approx 4.5m). Loss of light in garden.
Decided Trees
Other tree works applications
In Cheshire West and Chester
-
26/02846/TPO Awaiting decision
31 Covert Rise Tattenhall Chester Cheshire West And Chester CH3 9HA
T1- X1 Oak Tree. To carry out a crown reduction on the entire tree canopy of between 2-3 metres. The tree is in clear decline, sparse canopy, lacking vitality, lots of deadwood and branch dieback. The root system on around 40% of the tree looks to have been covered with historic amounts of soil when the property was constructed.
-
26/02823/TPO Awaiting decision
Churton Lodge Chester Road Churton by Aldford Chester CH3 6LA
One pine at the entrance to Churton Lodge shown circled in red in the photo. This is a very overmature tree with three huge bottom limbs. Their used to be another pine behind this one which blew down as a result it lack and limbs on this side to help balance the tree. My fear is these limbs will either rip off due to their size and result in the loss of tree or cause it to fall down like its sister tree. I would like to just remove these three limbs to try and prevent this.
-
26/02819/TPO Awaiting decision
2 Hadrian Way Cuddington Northwich Cheshire West And Chester CW8 2JR
After consultation with a qualified arborist (Alex Davies from AJD Tree Care, Sandbach) regarding several trees on our property, he recommended the following actions (please refer to sketch map for the location of the affected trees T1, T2, T3 and T4) T1 Copper Beech TPO V/81/00175/ORD Tree No 9 Crown Lift to raise the lower small branches which overhang the pavement and are currently at head height in places T2 and T3 Sycamore Conservation Area owned by Church Crown Lift to remove the lower branches which overhang the garden of 2 Hadrian Way and are currently at head height in places T4 Sycamore Conservation Area joint owned by Church and 2 Hadrian Way Crown Lift to remove lower branches which overhang the garden of 2 Hadrian Way and are currently scraping the garage roof. The wind causes the branch to bang the roof which we believe will increase the likelihood of structural damage in bad weather. We have only been in this property for about 6 months but we recall that the previous owners suffered damage to the garage roof from a falling branch some years ago - presumably the same tree. We have spoken to the Church Warden (Ali Fletcher) about the proposed work, and on behalf of the church, she is happy for the work to proceed from her perspective.
-
26/02810/TPO Awaiting decision
Land Adjacent To 9 Beasley Close Great Sutton Ellesmere Port Cheshire West and Chester CH66 2SX
T2 Yew - Partial crown reduction by up to 2m to clear light column and reinstate light spray to road. T3 Lime - Partial crown reduction by up to 2m to clear light column and reinstate light spray to road.
-
26/02816/TPO Awaiting decision
Wades Clough Meadow Close Winsford CW7 2UE
Ash - Dismantle to a 2 metre monolith Oak no. 1 - Reduce radial branches by 4 metres to lessen mechanical load, reduce height to a maximum of 2 metres to balance. Oak no. 2 - Dismantle to 6 metre monolith