Planning application
T/00050/26/TCA
Quidhampton Mill Station Road Overton Basingstoke Hampshire RG25 3DU
Proposal
T1 Ash: fell. A2: 1 Ash: fell, 1 Sycamore: fell.
As published by the council, reference T/00050/26/TCA
Timeline
Dates from the published record
-
23 Jan 2026
Received by Basingstoke and Deane
-
26 Jan 2026
Validated
Checked as complete and ready for consideration.
-
26 Feb 2026
Decision issued: Raise No Objection
-
25 Jul 2026
Added to PlanIndex
What a grant of permission means
The process from here
Permission has been granted, usually subject to conditions listed on the decision notice, some of which must be discharged before work starts. The decision notice on the council portal sets out exactly what was approved.
Work must normally begin within three years of the decision or the permission lapses. Neighbours cannot appeal a grant; challenging one means judicial review of how the decision was made, within tight time limits.
About trees applications
How this application type works
Tree applications cover work to protected trees: those under a tree preservation order need consent for pruning or felling, and trees in a conservation area need six weeks written notice before work starts. The council assesses the amenity value of the tree and can refuse consent, approve it with conditions, or in conservation areas make a preservation order in response.
Nearby applications
Within 500 metres
-
T/00316/26/TCA Awaiting decision
25 Station Road Overton Basingstoke Hampshire RG25 3DU
T1 Crab Apple: Fell T2 Cherry: Crown lift to 4m from ground
-
T/00596/25/TCA Granted
Quidhampton Mill Station Road Overton Basingstoke Hampshire RG25 3DU
Tree work to including felling and pruning as per 'proposed tree work forms'.
-
T/00052/23/TCA Granted
4 Riverside Close Overton Hampshire RG25 3JU
Mature willow tree. To pollard back to secondary branches to a height of approximately 10 meters (current height 16 meters). To leave tree with a crown spread of approximately 5 meters (current crown spread 8 meters). Largest branch diameter to be cut approximately 200mm. All work to comply with BS3998.
-
T/00145/26/TCA Granted
4 Riverside Close Overton Hampshire RG25 3JU
T1 - Mature Willow tree - This is a large previously pollarded willow tree. We are intending to repollard the tree back to its previous reduction points (this is estimated to be cutting wood back that is roughly 100mm in diamater). We will also be carefully cutting the ivy off at the base of the tree, taking care not to damage the cambium layer of the willow when doing so.
-
25/02944/FUL Granted
1 Kingsclere Road Overton Basingstoke Hampshire RG25 3JA
Alterations to replace existing front and rear door and the erection of entrance gate to existing access.
-
T/00483/25/TCA Withdrawn
3 Kingsclere Road Overton Hampshire RG25 3JA
T1 Cherry - to be felled. The root system is disrupting the neighbours garden and foundations, the tree is pushing the boundary fence over and the canopy has outgrown its spaced and is over reaching the neighbours property.
Other trees applications
In Basingstoke and Deane
-
26/01551/TWRN Awaiting decision
4 Damsel Path Basingstoke Hampshire RG21 4NX
Prune tree overhanging boundary fence and house.
-
26/01235/TWRN Split decision
16 Dudley Close Basingstoke Hampshire RG23 8BP
T1, T2, T3 - FELL
-
26/01539/TWRN Awaiting decision
9 Achilles Close Chineham Basingstoke Hampshire RG24 8XB
Inspect tree and arrange appropriate works
-
T/00277/26/TPO Granted
12 Pamber Heath Road Pamber Heath Hampshire RG26 3TQ
G1 Group of oaks at the front of the property within boundary overhanging property and rubbing powerlines, including main road. 2-3m Reduction of northerly limbs over the power lines which are currently 7m, to finished length of 4m, to suitable growth points. Reduction of 2m over the main road and raising to 5m for highways.
-
T/00272/26/TPO Granted
Land East Of 124 Coniston Road Basingstoke Hampshire RG22 5HZ
T4 & T5 - Lift the epicormic growth from ground level to the height of the crown break on each tree. which is roughly at 5.5 - 6 metres, pruning cuts should not exceed 50mm dia to allow vehicle access on driveway.